コード 7500: Block %1 invalid protection level for command %2 (protection level act.: %3 prog.: %4)

Parameters: %1 = Block number %2 = Programmed command %3 = Current protection level of the command %4 = Programmed protection level of the command Definitions: On assigning a protection level for a parts program command via REDEF command - an impermissible parts program command has been programmed - a protection level has been programmed that is logi cally smaller (larger in value) than the protection level currently applicable for this command. - the relevant definition file has not been protected sufficently against write access. The write protection of the file must be at least as high as the highest protection level that has been assigned to a parts program command in this definition file. Reaction: Alarm display. Remedy: Modify definition files /_N_DEF_DIR/_N_M ACCESS_DEF or /_N_DEF_DIR/_N_UACCESS_DEFCESS_ DEF. Please see the Siemens Programmi ng Guide or the OEM documentation for the language commands permissible for the relevant system configurations. Program Continuation: Clear alarm with the RESET key. Restart part program