代碼 75019: [Channel %1: ] CLC: error ID: %2, angle %3

Parameters: %1 = Channel number %2 = Error ID %3 = Angle Definitions: The subfunction of the 3D clearance control programmed with CLC(3) "Closed-loop control in programmable direction" reports an error: Error ID: 1:The clearance control direction has not been defined. Probably, [ 0,0,0 ] has been programmed for the three simulated axes specifying the direction components. In the "angle" parameter, zero is output. 2:The max. permissible angle between the orientation of the blast tool and the programmed control direction was exceeded. The permissible angle is set in machine data $MC_CLC_PROG_ORI_MAX_ANGLE. The angle triggering the alarm is output in the 3rd alarm parameter. Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Enlarge the monitoring angle or modify the programming in the part program. Program Continuation: Clear alarm with the RESET key. Restart part program