Code 75604: [Channel %1: ] RESU: Return traveling not possible, error code %2

Parameters: %1 = Channel number %2 = Error code Definitions: Return traveling is not possible, as the following error was detected: Error code = 1: The current reverse block for return traveling is likely to be a block of cc_resu_ini.spf or cc_resu_end.spf programmed with a block number. It is impermissible to program block numbers in the subroutines cc_resu_ini.spf and cc_re su_end.spf, as they have an internal meaning. Error code = 2: Unable to create cc_resu.mpf, as DRAM is insufficient. Error code = 4: The selected continuation block is likely to be a block of cc_resu_ini.spf or cc_resu_end.spf programmed with block number. It is impermissible to program block numbers in the subroutines cc_resu_ini.spf and cc_resu_end. spf, as they have an internal meaning. Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Error code = 1 or 4: Remove all block numbers fr om cc_resu_ini.spf and cc_resu_end.spf and their subroutines. Error code = 2: Assign a higher value to machine date $MN_MM_DRAM_FILE_MEM_SIZE. Program Continuation: Clear alarm with the RESET key. Restart part program