Zurück zu allen Siemens Modellen Search all database
Siemens SINUMERIK 840D CNC
Siemens SINUMERIK 840D CNC Fehlercodes
Vollständige Alarm- und Fehlercode-Referenz für die Siemens SINUMERIK 840D CNC. Durchsuchen Sie unten alle 4014 dokumentierten Fehlercodes, die jeweils zu einer detaillierten Anleitung zur Fehlerbehebung führen.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Vollständige Alarmliste (Page 3 of 21)
Code 12110
[Channel %1: ] Block %2 block syntax cannot be interpreted
Lösung ansehen Code 12120
[Channel %1: ] Block %2 G function not separately programmed
Lösung ansehen Code 12130
[Channel %1: ] Block %2 illegal tool orientation
Lösung ansehen Code 12140
[Channel %1: ] Block %2 functionality %3 not implemented
Lösung ansehen Code 12150
[Channel %1: ] Block %2 operation %3 not compatible with data type
Lösung ansehen Code 12160
[Channel %1: ] Block %2 Value %3 lies beyond the value range
Lösung ansehen Code 12161
[Channel %1: ] Block %2 Error on defining the limit %3
Lösung ansehen Code 12162
[Channel %1: ] Block %2 Physical unit not allowed
Lösung ansehen Code 12163
[Channel %1: ] Block %2 Change of access protection not allowed
Lösung ansehen Code 12170
[Channel %1: ] Block %2 name %3 defined several times
Lösung ansehen Code 12180
[Channel %1: ] Block %2 illegal chaining of operators %3
Lösung ansehen Code 12185
[Channel %1: ] Block %2 a bit combination with %3 is not permitted
Lösung ansehen Code 12190
[Channel %1: ] Block %2 variab le of type ARRAY has too many dimensions
Lösung ansehen Code 12200
[Channel %1: ] Block %2 symbol %3 cannot be created
Lösung ansehen Code 12205
[Channel %1: ] Block %2 area specification missing for GUD area
Lösung ansehen Code 12210
[Channel %1: ] Block %2 string %3 too long
Lösung ansehen Code 12220
[Channel %1: ] Block %2 binary constant %3 in string too long
Lösung ansehen Code 12230
[Channel %1: ] Block %2 hexadecimal constant %3 in string too long
Lösung ansehen Code 12240
[Channel %1: ] Block %2 tool orientation %3 defined repeatedly
Lösung ansehen Code 12250
[Channel %1: ] Block %2 nested macro %3 not possible
Lösung ansehen Code 12260
[Channel %1: ] Block %2 too many initialization values specified %3
Lösung ansehen Code 12261
[Channel %1: ] Block %2 initialization of %3 not allowed
Lösung ansehen Code 12270
[Channel %1: ] Block %2 macro identifier %3 already defined
Lösung ansehen Code 12280
[Channel %1: ] Block %2 maximum macro length %3 exceeded
Lösung ansehen Code 12290
[Channel %1: ] Block %2 arithmetic variable %3 not defined
Lösung ansehen Code 12300
[Channel %1: ] Block %2 call-by-reference parameter missing on subroutine call %3
Lösung ansehen Code 12310
[Channel %1: ] Block %2 axis parameter missing on procedure call %3
Lösung ansehen Code 12320
[Channel %1: ] Block %2 parameter %3 is no variable
Lösung ansehen Code 12330
[Channel %1: ] Block %2 ty pe of parameter %3 incorrect
Lösung ansehen Code 12340
[Channel %1: ] Block %2 number of parameters too high %3
Lösung ansehen Code 12350
[Channel %1: ] Block %2 parameter %3 no longer possible
Lösung ansehen Code 12360
[Channel %1: ] Block %2 dimension of parameter %3 incorrect
Lösung ansehen Code 12370
[Channel %1: ] Block %2 range of values %3 not permissible
Lösung ansehen Code 12380
[Channel %1: ] Block %2 maximum memory capacity reached
Lösung ansehen Code 12390
[Channel %1: ] Block %2 initialization value %3 cannot be converted
Lösung ansehen Code 12400
[Channel %1: ] Block %2 fi eld %3 element does not exist
Lösung ansehen Code 12410
[Channel %1: ] Block %2 incorrect index type for %3
Lösung ansehen Code 12420
[Channel %1: ] Block %2 identifier %3 too long
Lösung ansehen Code 12430
[Channel %1: ] Block %2 specified index is invalid
Lösung ansehen Code 12440
[Channel %1: ] Block %2 maxi mum number of formal arguments exceeded
Lösung ansehen Code 12450
[Channel %1: ] Block %2 label defined twice
Lösung ansehen Code 12460
[Channel %1: ] Block %2 maximum number of symbols exceeded with %3
Lösung ansehen Code 12470
[Channel %1: ] Block %2 G function %3 is unknown
Lösung ansehen Code 12475
[Channel %1: ] Block %2 invalid G function number %3 programmed
Lösung ansehen Code 12480
[Channel %1: ] Block %2 subroutine %3 already defined
Lösung ansehen Code 12481
[Channel %1: ] Block %2 program attribute %3 not allowed
Lösung ansehen Code 12490
[Channel %1: ] Block %2 access permission level %3 is not valid
Lösung ansehen Code 12495
Channel %1 Block %2 Change (definition) of data class %3 is not allowed here
Lösung ansehen Code 12500
[Channel %1: ] Block %2 in this module %3 is not possible
Lösung ansehen Code 12510
[Channel %1: ] Block %2 too many machine data %3
Lösung ansehen Code 12520
[Channel %1: ] Block %2 too many tool parameters %3
Lösung ansehen Code 12530
[Channel %1: ] Block %2 invalid index for %3
Lösung ansehen Code 12540
[Channel %1: ] Block %2 Block is too long or too complex
Lösung ansehen Code 12550
[Channel %1: ] Block %2 name %3 not defined or option/function not activated
Lösung ansehen Code 12552
[Channel %1: ] Block %2 tool/magazine OEM parameter not defined. Option not set. Option not set.
Lösung ansehen Code 12553
[Channel %1: ] Block %2 name %3 option/function is not active
Lösung ansehen Code 12554
[Channel %1: ] Block %2 replacement cycle %3 for the predefined procedure is missing.
Lösung ansehen Code 12555
[Channel %1: ] Block %2 function not available (identification %3)
Lösung ansehen Code 12556
[Channel %1: ] Block %2 name %3 Name is already known
Lösung ansehen Code 12560
[Channel %1: ] Block %2 programmed value %3 exceeds allowed limits
Lösung ansehen Code 12570
[Channel %1: ] Block %2 too many motion synchronous actions in %3
Lösung ansehen Code 12571
[Channel %1: ] Block %2 %3 not permissible for motion synchronous action
Lösung ansehen Code 12572
[Channel %1: ] Block %2 %3 only permissible for motion synchronous action
Lösung ansehen Code 12573
[Channel %1: ] Block %2 motion-synchronous action: Call by reference parameters not allowed %3
Lösung ansehen Code 12580
[Channel %1: ] Block %2 %3 not permissible for assignment in motion synchronous action
Lösung ansehen Code 12581
[Channel %1: ] Block %2 invalid read access to %3 while in motion synchronous action
Lösung ansehen Code 12582
[Channel %1: ] Block %2 field index %3 incorrect
Lösung ansehen Code 12583
[Channel %1: ] Block %2 variable %3 no system variable
Lösung ansehen Code 12584
[Channel %1: ] Block %2 variable %3 cannot be read synchronously with motion
Lösung ansehen Code 12585
[Channel %1: ] Block %2 variable %3 cannot be changed synchronously with motion
Lösung ansehen Code 12586
[Channel %1: ] Block %2 motion synchronous action: type conflict in variable %3
Lösung ansehen Code 12587
[Channel %1: ] Block %2 motion synchronous action: operation/function %3 not allowed
Lösung ansehen Code 12588
[Channel %1: ] Block %2 motion synchronous action: address %3 not allowed
Lösung ansehen Code 12589
[Channel %1: ] Block %2 motion synchronous action: variable %3 not allowed with modal ID
Lösung ansehen Code 12590
[Channel %1: ] Block %2 global user data cannot be created
Lösung ansehen Code 12600
[Channel %1: ] Block %2 invalid line checksum
Lösung ansehen Code 12610
[Channel %1: ] Block %2 accessi ng single character with call-by- reference parameter not possible %3
Lösung ansehen Code 12620
[Channel %1: ] Block %2 accessing th is variable as single character not possible %3
Lösung ansehen Code 12630
[Channel %1: ] Block %2 skip ID/label in control structure not allowed
Lösung ansehen Code 12640
[Channel %1: ] Block %2 invalid nesting of control structures
Lösung ansehen Code 12641
[Channel %1: ] Block %2 maximum nesting depth of control structures exceeded
Lösung ansehen Code 12650
Channel %1 block %2 axis identifier %3 different in channel %4
Lösung ansehen Code 12660
[Channel %1: ] Block %2 motion synchronous action: variable %3 reserved formotion synchronous actions and technology cycles
Lösung ansehen Code 12661
[Channel %1: ] Block %2 technology cycle %3: no further subprogram call possible
Lösung ansehen Code 12700
[Channel %1: ] Block %2 contour definition programming not allowed as modal sub-programis active
Lösung ansehen Code 12701
[Channel %1: ] Block %2 illegal interpolation type for contour definition active
Lösung ansehen Code 12710
[Channel %1: ] Block %2 illegal language element in external language mode
Lösung ansehen Code 12720
[Channel %1: ] Block %2 program number for macro call (G65/G66) missing
Lösung ansehen Code 12722
[Channel %1: ] Block %2 multiple ISO_2/3 macro or cycle calls in the block
Lösung ansehen Code 12724
[Channel %1: ] Block %2 no radius programmed for cylinder interpolation acti vation/deactivation
Lösung ansehen Code 12726
[Channel %1: ] Block %2 illegal plane selection with parallel axes
Lösung ansehen Code 12728
[Channel %1: ] Block %2 distance for double turret not set
Lösung ansehen Code 12730
[Channel %1: ] Block %2 no valid transformation machine data parameterized
Lösung ansehen Code 12740
[Channel %1: ] Block %2 modal macro call %3 not possible
Lösung ansehen Code 14000
[Channel %1: ] Block %2 illegal end of file
Lösung ansehen Code 14001
[Channel %1: ] Block %2 illegal end of block
Lösung ansehen Code 14005
[Channel %1: ] Block %2 program %3 program-specific start disable has been set
Lösung ansehen Code 14006
[Channel %1: ] Block %2 invalid program name %3
Lösung ansehen Code 14008
[Channel %1: ] Block %2 WRITE command writes in the temporary memory area in /_N_EXT_DIR
Lösung ansehen Code 14009
[Channel %1: ] Block %2 illegal program path %3
Lösung ansehen Code 14010
[Channel %1: ] Block %2 invalid default parameter in subroutine call
Lösung ansehen Code 14011
[Channel %1: ] Block %2 program %3 not existing or will be edited
Lösung ansehen Code 14012
[Channel %1: ] Block %2 maximum subroutine level exceeded
Lösung ansehen Code 14013
[Channel %1: ] Block %2 number of subroutine passes invalid
Lösung ansehen Code 14014
[Channel %1: ] Selected program %3 not available or will be edited
Lösung ansehen Code 14015
[Channel %1: ] Block %2 program %3 is not enabled
Lösung ansehen Code 14016
[Channel %1: ] Block %2 error when calling the subroutine via M/T function
Lösung ansehen Code 14017
[Channel %1: ] Block %2 syntax error when calling the subroutine via M function
Lösung ansehen Code 14018
[Channel %1: ] Block %2 parts program command %3 not executable (protection level setpoint value / actual value: %4)
Lösung ansehen Code 14020
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
Lösung ansehen Code 14021
[Channel %1: ] Block %2 wrong value or wrong number of parameters on function or procedure call
Lösung ansehen Code 14022
[Channel %1: ] Block %2 error on function or procedure call, error code %3
Lösung ansehen Code 14025
[Channel %1: ] Block %2 motion synchronous action: illegal modal ID
Lösung ansehen Code 14026
[Channel %1: ] Block %2 motion synchronous action: invalid polynomial number in the FCTDEF command
Lösung ansehen Code 14027
[Channel %1: ] Block %2 motion-synchronous action: Too many technology cycles programmed.
Lösung ansehen Code 14028
[Channel %1: ] Block %2 motion-s ynchronous action: Technology cycle programmed with t oo many parameters
Lösung ansehen Code 14030
[Channel %1: ] Block %2 combine OSCILL and POSP during oscillation with infeedmotion
Lösung ansehen Code 14033
[Channel %1: ] Block %2 involute: no end point programmed
Lösung ansehen Code 14034
[Channel %1: ] Block %2 involute: angle of rotation too large
Lösung ansehen Code 14035
[Channel %1: ] Block %2 involute: start point invalid
Lösung ansehen Code 14036
[Channel %1: ] Block %2 involute: end point invalid
Lösung ansehen Code 14037
[Channel %1: ] Block %2 involute: radius invalid
Lösung ansehen Code 14038
[Channel %1: ] Block %2 involute not definable: end point error
Lösung ansehen Code 14039
[Channel %1: ] Block %2 involute: end point programmed several times
Lösung ansehen Code 14040
[Channel %1: ] Block %2 error in end point of circle
Lösung ansehen Code 14045
[Channel %1: ] Block %2 error in tangential circle programming
Lösung ansehen Code 14048
[Channel %1: ] Block %2 wrong number of revolutions in circle programming
Lösung ansehen Code 14050
[Channel %1: ] Block %2 nesting depth for arithmetic operations exceeded
Lösung ansehen Code 14051
[Channel %1: ] Block %2 arithmetic error in part program
Lösung ansehen Code 14055
[Channel %1: ] Block %2 impermissible NC language substitution, error code %3
Lösung ansehen Code 14060
[Channel %1: ] Block %2 invalid skip level with differential block skip
Lösung ansehen Code 14070
[Channel %1: ] Block %2 memory for variable s not sufficient for subroutine call
Lösung ansehen Code 14080
[Channel %1: ] Block %2 jump destination %3 not found
Lösung ansehen Code 14082
[Channel %1: ] Block %2 label %3 program section not found
Lösung ansehen Code 14085
[Channel %1: ] Block %2 instruction not allowed
Lösung ansehen Code 14088
[Channel %1: ] Block %2 axis %3 doubtful position
Lösung ansehen Code 14090
[Channel %1: ] Block %2 invalid D number
Lösung ansehen Code 14091
[Channel %1: ] Block %2 illegal function, index %3
Lösung ansehen Code 14092
[Channel %1: ] Block %2 axis %3 is wrong axis type
Lösung ansehen Code 14093
[Channel %1: ] Block %2 path interval <= 0 with polynominal interpolation
Lösung ansehen Code 14094
[Channel %1: ] Block %2 polynominal degree greater than 3 programmed for polynominal interpolation
Lösung ansehen Code 14095
[Channel %1: ] Block %2 radius for circle programming too small
Lösung ansehen Code 14096
[Channel %1: ] Block %2 illegal type conversion
Lösung ansehen Code 14097
[Channel %1: ] Block %2 string cannot be converted to AXIS type
Lösung ansehen Code 14098
[Channel %1: ] Block %2 conversion error: no valid number found
Lösung ansehen Code 14099
[Channel %1: ] Block %2 result in string concatenation too long
Lösung ansehen Code 14100
[Channel %1: ] Block %2 orientation transformation not available
Lösung ansehen Code 14101
[Channel %1: ] Block %2 orientation transformation not active
Lösung ansehen Code 14102
[Channel %1: ] Block %2 polynominal degree greater than 5 programmed for orientation vector angle
Lösung ansehen Code 14104
[Channel %1: ] Block %2 Active transformation allows neither vector programming nor interpolation
Lösung ansehen Code 14110
[Channel %1: ] Block %2 Euler angles and orientation vector components programmed
Lösung ansehen Code 14111
[Channel %1: ] Block %2 Euler angles, orientation vector and transformation axes programmed
Lösung ansehen Code 14112
[Channel %1: ] Block %2 programmed orientation path not possible
Lösung ansehen Code 14113
[Channel %1: ] Block %2 programmed lead angle too large
Lösung ansehen Code 14114
[Channel %1: ] Block %2 programmed tilt angle too large
Lösung ansehen Code 14115
[Channel %1: ] Block %2 illegal definition of workpiece surface
Lösung ansehen Code 14116
[Channel %1: ] Block %2 absolute orientation programmed while ORIPATH/ORIPATHS is active
Lösung ansehen Code 14117
[Channel %1: ] Block %2 no angle or direction of the cone programmmed
Lösung ansehen Code 14118
[Channel %1: ] Block %2 no end orientation programmed
Lösung ansehen Code 14119
[Channel %1: ] Block %2 no intermediate orientation programmed
Lösung ansehen Code 14120
[Channel %1: ] Block %2 plane determination for programmed orientation not possible
Lösung ansehen Code 14121
[Channel %1: ] Block %2 no orientation defined (distance equals zero).
Lösung ansehen Code 14122
[Channel %1: ] Block %2 angle and direction of the cone programmed
Lösung ansehen Code 14123
[Channel %1: ] Block %2 nutation angle of the cone too small
Lösung ansehen Code 14124
[Channel %1: ] Block %2 start tangent for orientation is zero
Lösung ansehen Code 14125
[Channel %1: ] Block %2 programmed rotation is not possible
Lösung ansehen Code 14126
[Channel %1: ] Block %2 ORIPATH lift factor impermissible.
Lösung ansehen Code 14127
[Channel %1: ] Block %2 rotation programmed several times
Lösung ansehen Code 14128
[Channel %1: ] Block %2 absolute programming of the orienting rotation with active ORIROTC.
Lösung ansehen Code 14129
[Channel %1: ] Block %2 orientation angles and orientation vector components programmed
Lösung ansehen Code 14130
[Channel %1: ] Block %2 too many initialization values given
Lösung ansehen Code 14131
[Channel %1: ] Block %2 orientation axes and lead/tilt angles programmed
Lösung ansehen Code 14132
[Channel %1: ] Block %2 orientation axes incorrectly configured
Lösung ansehen Code 14133
[Channel %1: ] Block %2 G code for orientation definition not allowed
Lösung ansehen Code 14134
[Channel %1: ] Block %2 G code for orientation interpolation not allowed
Lösung ansehen Code 14136
[Channel %1: ] Block %2 Orientation polynomial is not permitted
Lösung ansehen Code 14137
[Channel %1: ] Block %2 Polynomials PO[PHI] and PO[PSI] are not permitted
Lösung ansehen Code 14138
[Channel %1: ] Block %2 Polynomials PO[XH], PO[YH] and PO[ZH] are not permitted
Lösung ansehen Code 14139
[Channel %1: ] Block %2 Polynomial for angle of rotation PO[THT] is not permitted
Lösung ansehen Code 14140
[Channel %1: ] Block %2 position programming without transformation not allowed
Lösung ansehen Code 14144
[Channel %1: ] Block %2 PTP movement not allowed
Lösung ansehen Code 14146
[Channel %1: ] Block %2 CP or PTP movement without transformation not allowed
Lösung ansehen Code 14147
[Channel %1: ] Block %2 spline for orientation not possible.
Lösung ansehen Code 14148
[Channel %1: ] Illegal reference system for Cartesian manual traverse
Lösung ansehen Code 14150
[Channel %1: ] Block %2 illegal tool carrier number programmed or declared (MD)
Lösung ansehen Code 14151
[Channel %1: ] Block %2 illegal tool carrier rotation
Lösung ansehen Code 14152
[Channel %1: ] Block %2 tool carrier: invalid orientation. Error code: %3
Lösung ansehen Code 14153
[Channel %1: ] Block %2 unknown tool carrier type: %3
Lösung ansehen Code 14154
[Channel %1: ] Block %2 The amount of fine correction in parameter %3of the orientable toolholder %4 is too large
Lösung ansehen Code 14155
[Channel %1: ] Block %2 invalid base frame definition for tool carrier offset
Lösung ansehen Code 14156
[Channel %1: ] Toolholder selection error at reset
Lösung ansehen Code 14157
[Channel %1: ] Block %2 illegal interpolation type with MOVT
Lösung ansehen Code 14159
[Channel %1: ] Block %2 more than two angles programmed with ROTS or AROTS
Lösung ansehen Code 14160
[Channel %1: ] Block %2 tool length selection without geometry axis specification
Lösung ansehen Code 14162
[Channel %1: ] Block %2 error %3 on activation of the CUTMOD function
Lösung ansehen Code 14165
[Channel %1: ] Block %2 selected ISO H/D number %3 does not match tool %4
Lösung ansehen Code 14166
[Channel %1: ] Block %2 error %3 when programming a tool length offset with TOFF / TOFFL
Lösung ansehen Code 14170
[Channel %1: ] Block %2 illegal interpolation type with tool length compensation
Lösung ansehen Code 14180
[Channel %1: ] Block %2 H number %3 is not defined
Lösung ansehen Code 14181
[Channel %1: ] Block %2 ISO tool offset %3 not present
Lösung ansehen