Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 14 of 21)
Código 112541
Program cannot be interpreted
Ver solución Código 112542
GUD variable does not exist or%narray dimension too small:%1
Ver solución Código 112543
Prog. was created with higher software version
Ver solución Código 112544
Program cannot be opened.%nIt is already being edited.
Ver solución Código 112546
Program cannot be opened.%nNo read access to the file.
Ver solución Código 112550
Sequencer programming is not opened.
Ver solución Código 112560
USB device no longer available, execution%nfrom external source no longer possible.
Ver solución Código 112561
USB device no longer availabl e,%nexecution of Extcall no longer possible.
Ver solución Código 112562
USB device is no longer available, editing is%ncanceled. The last changes have been lost.
Ver solución Código 112563
USB device is not available, program editing%nis canceled. Last changes have been lost.
Ver solución Código 112564
USB device no longer av ailable,%ncopying was aborted.
Ver solución Código 112565
USB device no longer available.
Ver solución Código 112600
Spindle not synchronized
Ver solución Código 112601
ShopTurn: %1
Ver solución Código 112604
Connection to the PLC broken off
Ver solución Código 112605
Asynchronous subprogram was%nnot executed
Ver solución Código 112611
NC start not possible :%nDeselect single block
Ver solución Código 112620
Language %1 not installed.
Ver solución Código 112650
Unknown PLC error
Ver solución Código 112999
Faulty graphic data. Exit graphic %nand restart
Ver solución Código 113000
Invalid value - value range: %1
Ver solución Código 113001
Incorrect confi guration in line %1
Ver solución Código 113002
Insufficient access level!
Ver solución Código 113003
Error when writing variable %1
Ver solución Código 113004
Insufficient dynamic memory
Ver solución Código 113005
Incorrect NC file positioning: %1
Ver solución Código 113006
NC program is not open %1
Ver solución Código 113007
Cannot read NC block, no.: %1
Ver solución Código 113008
NC block cannot be written, no.: %1
Ver solución Código 113009
File name missing for copy
Ver solución Código 113010
Cannot open file: %1
Ver solución Código 113011
Cannot write file: %1
Ver solución Código 113012
Cannot write NC file: %1
Ver solución Código 113013
Cannot read NC file: %1
Ver solución Código 113014
Invalid NC file name: %1
Ver solución Código 113015
DLL not loaded: %1
Ver solución Código 113016
No link to %1
Ver solución Código 113017
Incorrect DDE address: %1
Ver solución Código 113018
Invalid command: %1
Ver solución Código 113019
Invalid data format: %1
Ver solución Código 113020
Cursor data item cannot be written
Ver solución Código 113021
Error on data access: %1
Ver solución Código 113022
No variables exist
Ver solución Código 113023
Impossible to enter code: %1
Ver solución Código 113024
Invalid mask property: %1
Ver solución Código 113025
Invalid action: %1
Ver solución Código 113026
Invalid type of action: %1
Ver solución Código 113027
No mask defined
Ver solución Código 113028
You cannot insert here
Ver solución Código 113029
Mask '%1' being generated - please wait ...
Ver solución Código 113030
PLC connection '%1' not in 'common.com'
Ver solución Código 113031
PLC interpreter: %1 bytes not allocated
Ver solución Código 113032
Invalid PLC command: %1
Ver solución Código 113033
Block cannot be recompiled
Ver solución Código 113034
No softkey is allowed in this state - ignored
Ver solución Código 113100
Internal error %1
Ver solución Código 120000
Area %1 cannot be loaded! Acknowledge alarm, press area switchover key!
Ver solución Código 120001
Area %1 cannot be selected. Please deactivate area %2
Ver solución Código 120002
Area %1 is still active. Please deactivate area %1
Ver solución Código 120003
Area %1 cannot be deactivated. Please try again
Ver solución Código 120005
Please acknowledge the dialog box in area %1
Ver solución Código 120006
The channel switchover is currently disabled by area %1.
Ver solución Código 120007
The channel switchover is currently disabled.
Ver solución Código 120008
Control unit switchover, PLC timeout: %1
Ver solución Código 120010
PCU temperature alarm
Ver solución Código 120011
Request for authority to operate from another station.%nTo retain authority to operate=>Recall key,%nto transfer authority to operate=>wait (no entry)
Ver solución Código 120020
PCU fan monitoring CPU fan
Ver solución Código 120021
PCU fan monitoring housing fan 1
Ver solución Código 120022
PCU fan monitoring housing fan 2
Ver solución Código 120029
PCU: fatal hard disk error
Ver solución Código 120120
%1 see explanation
Ver solución Código 120200
Image preparation suppressed
Ver solución Código 120201
Communication failure
Ver solución Código 120202
Waiting for a connection to the NC/PLC
Ver solución Código 120203
Communication failure
Ver solución Código 120301
Faulty entry for hardkey 'Program' in Keys.ini.
Ver solución Código 120302
The selection is not possible. A prog ram has to have been edited first via the area 'Program'.
Ver solución Código 120303
The selection is not possible. The edited file %1 no longer exists.
Ver solución Código 120304
The selection is not possible. The file %1 has insufficient read rights.
Ver solución Código 120305
Selection is not possible. The file %1 is currently being edited.
Ver solución Código 120306
The selection is not possible. The file %1 is selected and active in channel %2.
Ver solución Código 120307
File %1 cannot be opened for the editor because it is selected in channel %2 for execution by external sources.
Ver solución Código 120308
In the event of an emergency stop, the program %1 can only be changed in the machine/program correction area.
Ver solución Código 120309
The selection is not pos sible. Please close the simulation and repeat the selection.
Ver solución Código 120310
The selection is not possible. Please wait for the pending action or terminate it, then repeat the selection.
Ver solución Código 120400
The settings for the acyclic links with the drive units are not yet effective.%nSwitch off/on HMI !
Ver solución Código 120401
SINAMICS: Write job for paramete r %1, value %2, area %3: %4s timeout!
Ver solución Código 120402
Bus%1.Slave%2: %3: First commi ssioning of SINAMICS required!
Ver solución Código 120403
Bus%1.Slave%2: %3: Check/acknowledge topology!
Ver solución Código 120404
Setting up acyclic link %1 failed.%nSwitch off/on control, drives and HMI.
Ver solución Código 120405
SINAMICS: Firmware update for DRIVE-CLiQ components is running.%nPlease wait for the fi rmware update to be completed!
Ver solución Código 120406
SINAMICS: Firmware updat e of DRIVE-CLiQ components completed.%nSwitch off/on drive system!
Ver solución Código 129900
Data of passive drives are not backed up!
Ver solución Código 129901
Time determination is be ing initialized. Please wait...
Ver solución Código 129902
Recorded data are being processed. Please wait...
Ver solución Código 129903
Time determination is active.
Ver solución Código 129904
%1: Current NCK Version %2 is too low for time me asurement. Version 500000 or higher will be required.
Ver solución Código 129905
%1: Unable to determine the NCK version for time measurement.
Ver solución Código 129906
%1: Unable to determine the number of channels.
Ver solución Código 129907
%1:The max. number of channels could not be determined.
Ver solución Código 129908
%1: Unable to determine active channels.
Ver solución Código 129909
%1: Unable to determine the name of channel %2.
Ver solución Código 129910
%1: Unable to determine general machine data.
Ver solución Código 129911
%1: Unable to determine machine data $MN_MM_PROTOC_NUM_FILES[1,10].
Ver solución Código 129912
%1: Unable to determine machine data $MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10].
Ver solución Código 129913
%1: Unable to determine machine data $MN_MM_PROTOC_NUM_ETP D_OEM_LIST[1,10].
Ver solución Código 129914
%1: Unable to determine channel-specific machine data.
Ver solución Código 129915
%1: Unable to determine active user for channel %2.
Ver solución Código 129930
%1: Min. %2 log files are required for the requested time determination ($MN_MM_PROTOC_NUM_FILES[%3])
Ver solución Código 129931
%1: Min. %2 ETPD lists are required for the requested time determination ($MN_MM_PROTOC_NUM_ETPD_STD_LIST[%3])
Ver solución Código 129932
DAT: The c onfigured NCU (%1) for part pr ogram %2 in channel %3 is invalid.
Ver solución Código 129933
DAT: The configured channel (%1) for part program %2 in NCU %3 is invalid.
Ver solución Código 129934
DAT: Part program %1 has been configured more than once.
Ver solución Código 129935
NC configuration not yet determined.
Ver solución Código 129936
Initialization not yet executed.
Ver solución Código 129937
Workpiece selection missing.
Ver solución Código 129938
Status of workpiece (%1) could not be determined.
Ver solución Código 129939
Workpiece (%1) is currently being machined.
Ver solución Código 129940
Error in workpiece (%1).
Ver solución Código 129941
Not all involved channels are in RESET.
Ver solución Código 129942
Not all involved channels are in AUTO.
Ver solución Código 129943
%1: Invalid configuration of $AN_TIMER.
Ver solución Código 129944
%1: $AN_TIMER[%2] not running.
Ver solución Código 129945
%1: The current NCK version (%2) is too old for this type of time measuring.
Ver solución Código 129946
General error. See entry in log file ITSx.LOG.
Ver solución Código 142000
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142001
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142002
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142003
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142004
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142005
Machine ready for remote diagnostics! %1 %2 %3 %4
Ver solución Código 142006
Machine ready for remote diagnostics! %1 %2 %3 %4
Ver solución Código 142007
Machine ready for remote diagnostics! %1 %2 %3 %4
Ver solución Código 142008
Machine ready for remote diagnostics! %1 %2 %3 %4
Ver solución Código 142009
Machine ready for remote diagnostics! %1 %2 %3 %4
Ver solución Código 142010
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 142011
Operator at the machine is waiting for support via remote diagnostics! %1 %2 %3 %4
Ver solución Código 149000
Job execution failed
Ver solución Código 149001
No boot script available
Ver solución Código 149002
Error during execution of script
Ver solución Código 149005
A job could not be fetched from the server.
Ver solución Código 149006
The job fetched from the server does not contain any data.
Ver solución Código 149007
The server certificate has expired, or the date and time settings on the computer are incorrect.
Ver solución Código 149008
Access to the ePS configuration failed for unknown reasons.
Ver solución Código 149009
The ePS configuration could not be initialized.
Ver solución Código 149010
The ePS machine identity could not be initialized.
Ver solución Código 149200
The boot script has not received a valid service script ID from the ePS server.
Ver solución Código 149201
The boot script has not received a service script from the ePS server.
Ver solución Código 149202
The boot script could not start the service script.
Ver solución Código 149203
The service script could not start the data transfer service script.
Ver solución Código 149305
PLC monitor canceled during access to the controller.
Ver solución Código 149306
PLC monitor failed while generating the data access object, or there is a hotlink error.
Ver solución Código 149307
PLC monitor canc eled during timeout during initial RESET.
Ver solución Código 149308
PLC monitor canceled due to faulty trigger.
Ver solución Código 149310
NC monitor canceled on account of access error to the controller.
Ver solución Código 149311
NC monitor failed while generating the DataAccess object.
Ver solución Código 149315
PLC DataUpload failed while generating the DataAccess object.
Ver solución Código 149316
PLC DataUpload canceled on account of missing parameters.
Ver solución Código 149317
PLC DataUpload canceled because the timer could not be started.
Ver solución Código 149320
NC monitor canceled because the generation of the DataAccess object failed.
Ver solución Código 149321
NC monitor canceled on account of missing parameters.
Ver solución Código 149322
NC monitor canceled because the timer could not be started.
Ver solución Código 150201
Communication to %1 failed
Ver solución Código 150202
Waiting for a connection to %1
Ver solución Código 150204
---- Start alarm acquisition -----
Ver solución Código 201001
<location>Internal software error
Ver solución Código 201002
<location>Internal software error
Ver solución Código 201003
<location>Acknowledgement delay when accessing the memory
Ver solución Código 201004
<location>Internal software error
Ver solución Código 201005
<location>Firmware download for DRIVE-CLiQ component unsuccessful
Ver solución Código 201006
<location>Firmware update for DRIVE-CLiQ component required
Ver solución Código 201007
<location>POWER ON for DRIVE-CLiQ component required
Ver solución Código 201009
<location>CU: Control module overtemperature
Ver solución Código 201010
<location>Drive type unknown
Ver solución Código 201011
<location>Download interrupted
Ver solución Código 201012
<location>Project conversion error
Ver solución Código 201015
<location>Internal software error
Ver solución Código 201016
<location>Firmware changed
Ver solución Código 201017
<location>Component lists changed
Ver solución Código 201030
<location>Sign-of-life failure for master control
Ver solución Código 201031
<location>Sign-of-life failure for AOP OFF in REMOTE
Ver solución Código 201033
<location>Units changeover: Reference parameter value invalid
Ver solución Código 201034
<location>Units changeover: Calculation parameter values after reference value change unsuccessful
Ver solución Código 201035
<location>ACX: Boot from the back-up parameter back-up files
Ver solución Código 201036
<location>ACX: Parameter back-up file missing
Ver solución Código 201037
<location>ACX: Re-naming the parameter back-up file unsuccessful
Ver solución Código 201038
<location>ACX: Loading the parameter back-up file unsuccessful
Ver solución Código 201039
<location>ACX: Writing to the parameter back-up file was unsuccessful
Ver solución Código 201040
<location>Save parameter settings and carry out a POWER ON
Ver solución Código 201041
<location>Parameter save necessary
Ver solución Código 201042
<location>Parameter error during project download
Ver solución Código 201043
<location>Fatal error at project download
Ver solución Código 201044
<location>CU CompactFlash: Descriptive data error
Ver solución Código 201045
<location>CU CompactFlash: Configuring data invalid
Ver solución Código 201049
<location>CU CompactFlash: It is not possible to write to file
Ver solución Código 201050
<location>CompactFlash card and device not compatible
Ver solución Código 201051
<location>Drive object type is not available
Ver solución Código 201052
<location>CU: System overload calculated for the complete target topology
Ver solución Código 201053
<location>CU: System overload measured
Ver solución Código 201064
<location>CU: Internal error (CRC)
Ver solución