代碼 Er-05: No-Load Current Error
問題描述與安全警告
Yaskawa A1000 AC Drive 觸發了嚴重的 No-Load Current Error 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Code type: Auto-tuning fault/alarm Manual section: Yaskawa A1000 Troubleshooting Motor data entered during Auto-Tuning was incorrect. - Make sure the data entered to the T1 parameters match the information written on the motor nameplate. - Restart Auto-Tuning and enter the correct information. Results from Auto-Tuning are outside the parameter setting range or the tuning process took too long. - Check and correct faulty motor wiring. - Perform Rotational Auto-Tuning. The load during Rotational Auto-tuning was too high. - Disconnect the motor from machine and restart Auto-Tuning. If motor and load cannot be uncoupled make sure the load is lower than 30%. - If a mechanical brake is installed, make sure it is fully lifted during tuning.
Source: Yaskawa AC Drive A1000 High Performance Vector Control Drive Technical Manual (SIEP C710616 21H)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Yaskawa A1000 AC Drive 警報
由 Yaskawa 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 A1000 AC Drive 出現類似 Er-05 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 280 Yaskawa A1000 AC Drive 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code Er-05.
Need a searchable reference for more Yaskawa A1000 AC Drive manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026