代码 LSo: Fault

Code type: Fault Manual section: Yaskawa A1000 Troubleshooting The incorrect motor code has been entered. Enter the correct motor code for the PM motor being used into E5-01. For special-purpose motors, enter the correct data to all E5 parameters according to the test report provided for the motor. The load is too heavy. Reduce the load. Replace the drive with a larger model. The drive incorrectly detected the position of the motor poles. Make sure some external force is not rotating the motor at start. Enable Speed Search Selection at start. (b3-01 = 1) If the value displayed in U6-57 is lower than 819, then set the polarity judge current (n8-84) higher than the default value. Values set to parameters L8-93, L8-94, and L8-95 are incorrect. Increase the value set to L8-93. Increase the value set to L8-94. Increase the value set to L8-95.