代碼 oPE07: Multi-Function Analog Input Selection Error

Code type: Operator programming error Manual section: Yaskawa A1000 Troubleshooting At least two analog input terminals are set to the same function (i.e., at least two of these parameters has the same setting: H3-02, H3-10, or H3-06). Change the settings to H3-02, H3-10, or H3-06 so that functions no longer conflict. Note: Both 0 (frequency reference bias) and F (not used) or 1F (Through mode) can be set to H3-02, H3-10, or H3-06 at the same time. The following simultaneous contradictory settings: - H3-02, H3-10, or H3-06 = B (PID Feedback) while H6-01 (Pulse Train Input) = 1 (PID Feedback) - H3-02, H3-10, or H3-06 = C (PID Target Value) while H6-01 = 2 (pulse train input sets the PID target value) - H3-02, H3-10, or H3-06 = C (PID Target Value) while b5-18 = 1 (enables b5-19 as the target PID value) - H6-01 = 2 (PID target) while b5-18 = 1 (enables b5-19 as the target PID value) Disable one of the PID selections.