代码 510103: Probe not in spindle
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Probe not in spindle 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
M94 (Probe On (spindle probe)) was programmed, although the probe is not in the spindle. The error has the following effect: Feed Stop No axis movements possible. Read disable Control reads no further program blocks into memory. 1. Change the probe in the spindle. 2. Check whether the correct tool place has been defined for the probe and whether or not the probe is actually in the spindle. 3. Press [RESET] key. Message is cleared. Probe LP2/OMP40 Error messages Measuring Probe not in spindle
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 510103 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 510103.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026