代碼 700157: Safety pressure switch protective doors
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Safety pressure switch protective doors 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
On closing the automatic protective doors, the safety pressure switch has been activated. The error message remains pending only for so long as the safety pressure switch is being activated. Closing the protective doors is immediately interrupted and the protective doors are opened. 1. Close protective doors again. 2. Check safety pressure switches (inputs left / right) and door profiles. Cause 1: Error messages Protective equipment Safety pressure switch protective doors The safety pressure switch registers as already actuated. It is not possible to close the protective doors. Check safety pressure switches (inputs left / right) and door profiles.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 700157 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700157.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026