Código 700163: Rapid feed limit active (key switch/H30)

Input key switch was switched on and is at [Key-operated switch "Input“ position [1-3]. Function H30 - Rapid feed limit (On) was programmed. Message is displayed for informational purposes. Rapid feed speed of the machine is limited to 30%. 1. Switch off input key switch. 2. Deactivate function H30 - Rapid feed limit (On) with the counterfunction H31 - Rapid feed limit (Off). If the rapid feed limit is not desired with the key switch switched on, the [RAPID] key can be pressed. Machine now runs at 100% rapid feed speed. The LED of the [RAPID] key is illuminated. This function is reset with the [RESET] key or by deactivating the [RAPID] key. Reduction of rapid feed to 30% with the activated key switch can be deactivated with PLC machine data. (E.g.: for editing another program during machining) PLC – MD 14510[1] Bit 7 = 0 with rapid feed reduction with activated key switch PLC – MD 14510[1] Bit 7 = 1 without rapid feed reduction with activated key switch (Attention: the entry of the bits is made in decimal code) Causes Remedies