Volver a todos los modelos de Chiron Search all database
Chiron Siemens-Control CNC
Códigos de error de Chiron Siemens-Control CNC
Referencia completa de códigos de alarma y error para Chiron Siemens-Control CNC. Explore a continuación los 545 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Chiron Siemens-Control CNC
Search all 545 Chiron Siemens-Control CNC codes without changing pages.
Lista completa de alarmas (Page 1 of 3)
Código 700114
Feed (+) direction disabled
Ver solución Código 700115
Feed (-) direction disabled
Ver solución Código 700133
Retraction only with INC and key switch
Ver solución Código 700138
Manual pulse generator not plugged in
Ver solución Código 700310
Incorrect PLC-MD: 14512[8] FZ08 identification (FZ08K=1 / FZ08K-Magnum=2)
Ver solución Código 700027
PLC-MD wrong (option mpg)
Ver solución Código 700005
Pneumatic pressure missing
Ver solución Código 701536
Power save active (machine in standby mode)
Ver solución Código 510013
Home position missing
Ver solución Código 700016
Control cabinet cooler malfunction
Ver solución Código 701537
Warm-up of machine active
Ver solución Código 700100
Fine filter air purge dirty (1)
Ver solución Código 700101
Fine filter spindle air purge dirty (2)
Ver solución Código 700002
Limit switch Y-axis
Ver solución Código 700003
Limit switch Z-axis
Ver solución Código 700432
Re-approach Z-axis home position (clutch released)
Ver solución Código 700400
Safety clutch Z-axis disengaged
Ver solución Código 701732
Warning! The X axis did not switch over to the direct measuring system
Ver solución Código 701733
Warning! The Y axis did not switch over to the direct measuring system
Ver solución Código 701734
Warning! The Z axis did not switch over to the direct measuring system
Ver solución Código 700021
X-axis not in position
Ver solución Código 700229
X-axis collision! (Check reference point)
Ver solución Código 700020
Y-axis not in position
Ver solución Código 700230
Y-axis collision! (Check reference point)
Ver solución Código 700019
Z-axis not in position
Ver solución Código 700231
Z-axis collision! (Check reference point)
Ver solución Código 700001
Limit switch X-axis
Ver solución Código 700109
4/5 axis selected on wrong table side
Ver solución Código 700110
4/5 axis on loading side selected
Ver solución Código 700143
4-axis not in position
Ver solución Código 700144
5-axis not in position
Ver solución Código 700353
Axes not in loading position
Ver solución Código 701109
Axis coupling rotary table active! Individual traversing not possible
Ver solución Código 701008
Brake, 4th axis not actuated
Ver solución Código 701110
Rotary table speed > 200 rpm not possible!
Ver solución Código 701057
Speed monitoring 5th axis (rotary table)
Ver solución Código 701058
Speed monitoring 6th axis (rotary table)
Ver solución Código 701852
Speed monitoring, A axis
Ver solución Código 701112
Clamping 4th axis defective! (do not switch off machine)
Ver solución Código 702334
Clamping 4th axis not unclamped
Ver solución Código 701101
Clamping 5th axis defective! (do not switch off machine)
Ver solución Código 702341
5th axis not locked
Ver solución Código 702342
5th axis not released
Ver solución Código 701102
Clamping 6th axis defective! (do not switch off machine)
Ver solución Código 702350
6th axis not released
Ver solución Código 702349
6th axis not locked
Ver solución Código 702357
7th axis not locked
Ver solución Código 702358
7th axis not released
Ver solución Código 702816
A axis clamping defective! (don’t switch off machine)
Ver solución Código 702338
A-axis clamping not clamped
Ver solución Código 702337
A-axis clamping not unclamped
Ver solución Código 702818
BT axis clamping defective! (don’t switch off machine)
Ver solución Código 702820
C axis clamping defective! (don’t switch off machine)
Ver solución Código 702336
Counterbearing 4th axis not locked
Ver solución Código 702335
Counterbearing 4th axis not released
Ver solución Código 702344
Counterbearing 5th axis not locked
Ver solución Código 702343
Counterbearing 5th axis not released
Ver solución Código 702331
Rotary table run-time monitoring (speed >200 rpm)
Ver solución Código 700028
PLC-MD wrong (4/5 axis)
Ver solución Código 701111
PLC-MD wrong (temperature monitoring 4th axis)
Ver solución Código 701105
PLC-MD wrong (temperature monitoring 5th axis)
Ver solución Código 701106
PLC-MD wrong (temperature monitoring 6th axis)
Ver solución Código 701103
Controller enable 5th axis missing
Ver solución Código 701104
Controller enable 6th axis missing
Ver solución Código 702817
Controller enable A axis missing
Ver solución Código 702819
Controller enable BT axis missing
Ver solución Código 702821
Controller enable C axis missing
Ver solución Código 700722
Temperature monitoring 4th axis
Ver solución Código 700723
Temperature monitoring 5th axis
Ver solución Código 700728
Temperature monitoring 6th axis
Ver solución Código 701056
Warm-up cycle rotary table active (please wait)
Ver solución Código 701100
Rotary table warm-up cycle required! Start cycle in <JOG> mode, <5th A> and with the <Feed Start> key
Ver solución Código 701009
Monitoring, brake 4th axis! Relay defective! (do not switch off machine)
Ver solución Código 701459
Air suctioning: Electrostatic air filter not ready for operation
Ver solución Código 701461
Air suctioning: Filter monitoring, alarm min (check system)
Ver solución Código 701460
Air suctioning: Filter monitoring prewarning (clean filter)
Ver solución Código 700135
Mist collector not selected
Ver solución Código 701462
Air suctioning: Filter monitoring, alarm max (filter dirty)
Ver solución Código 701054
Flow monitor exhaust fan (1)
Ver solución Código 701055
Flow monitor exhaust fan (2)
Ver solución Código 701443
Mist collector water level minimum
Ver solución Código 701411
Mist collector water level overflow
Ver solución Código 701412
PLC_MD_-wrong (mist collector)
Ver solución Código 700017
Mist collector fan faulty (1)
Ver solución Código 701021
Error flow monitor exhaust fan (1)
Ver solución Código 701022
Error flow monitor exhaust fan (2)
Ver solución Código 702139
Airsensoring work area 1 not activated
Ver solución Código 702140
Airsensoring work area 2 not activated
Ver solución Código 702132
Error air sensoring 1 (part not clamped correctly)
Ver solución Código 702134
Error air sensoring 2 (part not clamped correctly)
Ver solución Código 702133
Error support check 1 (part not loaded)
Ver solución Código 702135
Error support check 2 (part not loaded)
Ver solución Código 702143
Part not removed from table side 1
Ver solución Código 702144
Part not removed from table side 2
Ver solución Código 700049
Set is missing
Ver solución Código 700118
Prox.switch workpiece pallet 1/2
Ver solución Código 700117
Workpiece changer lock./unlock (limit switch)
Ver solución Código 700010
Wrong program # or tableside
Ver solución Código 510004
Wrong table side
Ver solución Código 700128
No working area recognition
Ver solución Código 700127
Pendulum mode 'on' missing
Ver solución Código 700130
Fault workpiece changer - control
Ver solución Código 700131
Center divider not connected
Ver solución Código 700150
Center divider not in position
Ver solución Código 702345
Prewarning rotary table run-time monitoring (speed >200 rpm)
Ver solución Código 700043
Workpiece changer not in final position 1/2
Ver solución Código 700042
Workpiece changer not unlocked/up
Ver solución Código 700041
Workpiece changer not locked/down
Ver solución Código 700748
Error: Drive controller monitoring
Ver solución Código 700429
PLC-MD incorrect (braking module)
Ver solución Código 701513
PLC-MD wrong (undervoltage relay)
Ver solución Código 700525
Braking module malfunction
Ver solución Código 700524
Pre-warning, braking module
Ver solución Código 701541
Check loader selection (key switch)
Ver solución Código 701544
No rough part fed (loader)
Ver solución Código 701545
Loader in loading cycle
Ver solución Código 701444
Loader in collission area
Ver solución Código 700413
Loader not selected
Ver solución Código 701549
Loader not ready for operation
Ver solución Código 701548
Loader: Current operation has been completed in the machine.
Ver solución Código 701546
Robot: Fault connection (robot - DP-coupler)
Ver solución Código 701547
Robot: Fault connection (machine - DP-coupler)
Ver solución Código 701542
Safety fence not closed (loader)
Ver solución Código 700163
Rapid feed limit active (key switch/H30)
Ver solución Código 700013
Spindle rpm higher than 800
Ver solución Código 700733
Service function M555 (setting mode tool changer) is active.
Ver solución Código 700161
Service function M88 active
Ver solución Código 700160
Service function M90 is active (tool changer)
Ver solución Código 701900
STOP button on tool gate pressed
Ver solución Código 701954
Tool gripper stop not moved out
Ver solución Código 701955
Tool gripper stop not moved in
Ver solución Código 702236
Called-up tool is in the tool sluice
Ver solución Código 701616
Assignment in the tool gripper is incorrect ! (Tool physically <> magazine list)
Ver solución Código 701959
Fixation gate place not fixed
Ver solución Código 701960
Fixation gate place not released
Ver solución Código 701948
Loading not possible from the gate
Ver solución Código 701950
No empty place found in background magazine
Ver solución Código 701606
No tool in the tool gripper
Ver solución Código 701956
Protective door background magazine not closed
Ver solución Código 701627
Check sensor: >Magazine place free (background magazine)<
Ver solución Código 701625
Sensor monitoring! Tool gripper end stop: moved in / moved out
Ver solución Código 701628
Sensor monitoring! Tool gate fixation: fixated / unclamped
Ver solución Código 701600
Sensor monitoring! Tool gripper: Home position / tool magazine position
Ver solución Código 701634
Tool gripper not closed
Ver solución Código 701635
Tool gripper not open
Ver solución Código 701633
Tool gripper not in home position
Ver solución Código 701632
Tool gripper not in position tool magazine
Ver solución Código 701638
Tool loader not in home position
Ver solución Código 701604
Tool loader: Tool is in the gripper / opening not possible
Ver solución Código 701949
Tool gate is occupied
Ver solución Código 701947
Tool gate not in tool gripper position
Ver solución Código 701941
Tool gate, door not closed
Ver solución Código 701951
Tool gate door not closed and not locked
Ver solución Código 700206
Qty of temp. sensors not defined
Ver solución Código 700202
Error data transfer temperaturecompensation
Ver solución Código 700207
Temperature registration fault
Ver solución Código 700228
Error temperature compensation ball screw
Ver solución Código 700257
Iinitialising temperature comp ball screw active (please wait)
Ver solución Código 700201
Actual temperature not registered
Ver solución Código 700200
Reference temperature not registered
Ver solución Código 700203
Temp. comp. value too high
Ver solución Código 700204
Thermocontrol max. temperature exceeded
Ver solución Código 700205
Thermocontrol min. temperature value not reached
Ver solución Código 700134
Flow monitor cooling unit 1
Ver solución Código 700734
Flow monitor cooling unit 2
Ver solución Código 700209
Fault 2 cooling unit (spindle)
Ver solución Código 700208
Malfunction cooling unit 1
Ver solución Código 700713
Malfunction cooling unit 2
Ver solución Código 700725
Malfunction cooling unit coolant
Ver solución Código 700715
Cooling unit temperature monitoring 1
Ver solución Código 700714
Cooling unit temperature monitoring 2
Ver solución Código 700730
Service required for cooling unit (coolant)
Ver solución Código 700362
Flow monitor coolant high pressure (1)
Ver solución Código 700363
Flow monitor coolant high pressure (2)
Ver solución Código 700756
Flow monitor coolant low pressure
Ver solución Código 700758
Flow monitor rinse fixture (1)
Ver solución Código 701053
Flow monitor rinse fixture (2)
Ver solución Código 700757
Flow monitor bed rinsing
Ver solución Código 510117
Moisture sensor mainspindle motor (1)
Ver solución Código 700447
Moisture sensor main spindle motor (2)
Ver solución Código 702550
Moisture sensor mainspindle motor (3)
Ver solución Código 702551
Moisture sensor mainspindle motor (4)
Ver solución Código 702552
Moisture sensor mainspindle motor (5)
Ver solución Código 702553
Moisture sensor mainspindle motor (6)
Ver solución Código 702554
Moisture sensor mainspindle motor (7)
Ver solución Código 510122
Filter drum soiled / contact manometer defective
Ver solución Código 700210
Safety clutch chip spiral disengaged
Ver solución Código 700731
Replace coolant of cooling unit
Ver solución Código 700151
Coolant not selected
Ver solución Código 700755
Fill coolant system
Ver solución Código 700213
Coolant system overfilled
Ver solución Código 701744
Paper filter coolant level overflow
Ver solución Código 701742
Max. super clean water coolant level
Ver solución Código 701743
Min. super clean water coolant level
Ver solución Código 701740
Max. clean water coolant level
Ver solución Código 510119
Min. clean water coolant level
Ver solución Código 510120
Max. chip conveyor coolant level
Ver solución Código 700762
Min. chip conveyor coolant level
Ver solución Código 701746
Max. vacuum chamber coolant level
Ver solución Código 701747
End of paper filter
Ver solución 1-200 of 545
Next →