コード 700232: Tool data getting checked
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Tool data getting checked アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
A check of the tool data is currently being made. Feed Stop Read-in enable missing. On switching to "Automatic" operating mode, all tool data is read and compared with the basic data (+ tolerance) and monitored. If the machine is in "Automatic" operating mode and the control is switched on, the tool data is also read and checked. This monitoring is optional and can be deactivated with a PLC machine parameter. On output of a T - call, the data of the tool called is also checked. If a tool is changed by "hand", "Manual TC" active and "Basket upwards" activated, the data of this tool will be checked. If the tool data has been read without fault, the machine immediately runs on further. The length 1; radius 1 of cutting edge 1, the length 1 (if necessary); radius 1 of cutting edge 2 and whether a tool is broken are checked. If a discrepancy is found, an error message appears.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700232 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700232.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026