コード 700939: Tool data spindle missing (manual tool change: move tool changer up/down)
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Tool data spindle missing (manual tool change: move tool changer up/down) アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
The tool changing procedure was interrupted during resaving of tool data. (Reset, Emergency Stop etc.) Resaving of tool data was thus not realised correctly. The tool is in the spindle, but the associated tool data is missing. Error message is displayed. 1. Switch to manual mode. 2. Press the [MANUAL TOOL CHANGE] key. Re-store the tool data. Error messages Tool management Tool data spindle missing (manual tool change: move tool changer up/down) 3. Move the tool changer down with the [TC up/down] key. The message Tool live management error (Siemens) appears. 4. Press [RESET] key. Message is cleared. 5. Move the tool changer up with the [TC up/down] key. Tool data is re-stored again and the message is cleared.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700939 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700939.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026