コード 700247: Wrong tool in the spindle
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Wrong tool in the spindle アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Message can appear during a block search run. Cause 1: The machining program can not be started. 1. Press [RESET] key. Message is cleared. 2. Before the block search run, program the tool in the spindle again. Txx M6 On entering the machining program, possibly with "Block search", no coincidence was found between the spindle tool and the current T output. Feed Stop Read-in enable missing. Check the "entering position" in the NC program to see if the tool which belongs to this NC block is also the current spindle tool. Enter the correct NC block (T** M6). Or, change the tool necessary. Entry with block search run is only possible with the [Calc. contour] key, since otherwise there is no T output.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700247 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700247.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026