コード 700714: Cooling unit temperature monitoring 2
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Cooling unit temperature monitoring 2 アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Temperature sensor on the cooling unit has responded (signal state = 0). Temperature of the cooling unit is too high. PLC input signal "Temperature monitoring cooling unit 2" is not present. Error message appears immediately. "Feed Stop", as far as no thread-cutting or tool change is pending. "Spindle Stop", as far as no thread-cutting or tool change is pending. The controller enable of the spindles and axes is cancelled. 1. Check temperature on the cooling unit. 2. Check PLC input signal "Temperature monitoring cooling unit 2". 3. As soon as the malfunction has been remedied, press the [FEED START] or [JOG] and [RESET] keys. Message is cleared. Please refer to the cooling unit operating instructions for detailed instructions on malfunction causes.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700714 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700714.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026