コード 700740: Swivel head not in position (0°)
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Swivel head not in position (0°) アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
One of the following actions is pending, but the swivel head is not in the 0° position. A tool change is imminent. "Approach reference point" was started. Traverse magazine slide to the spindle. Traverse Y-axis into the tool changing area. The action is not executed. Feed Stop for the other axes. 1. Check the current position of the swivel head. 2. Switch to manual mode. 3. Move swivel head to the 0° position. 4. Press the following key: [RESET] 5. If the swivel head is already at the right position, but the error message cannot be cleared, the software position switch must be checked. Axis traversal is enabled in [INC 1], [INC 10] and [INC 100] modes.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700740 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700740.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026