代码 700748: Error: Drive controller monitoring
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Error: Drive controller monitoring 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
The machine control was switched off, but the drive module still signalled OK. PLC input signal "Drive control monitoring function" signals a (0) signal. (No fault) The plausibility monitoring of the "Drive control monitoring“ signal occurs about 3 seconds after the machine control is switched off. As long as the PLC input signal "Drive control monitoring" signals (0), the machine control cannot be switched on. When the machine control is switched off, this must signal a (1). 1. As soon as the PLC input signal "Drive control monitoring function" signals a (1) again, switch on the machine control with the [Control ON] key. 2. Press [RESET] key. 3. Message is cleared. Error messages Drives Error: Drive controller monitoring Signal state "Drive control monitoring": 0 = machine control switched on 1 = machine control switched off
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700748 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700748.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026