代码 701541: Check loader selection (key switch)
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Check loader selection (key switch) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
The key switch "With loader" was switched off, but the "Loader" function is still active. To prevent accidental deactivation of the "with loader“ function, deselection is only conditionally permitted. (See note) This message is only a note indicating that the "with loader“ function is still active, although the key switch has been switched off. Either deselect the "with loader“ operating mode correctly, or select it again. "With loader" function can be correctly deactivated with the "With loader" key switch in manual mode and [Key-operated switch "Input“ position [1-3]
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701541 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701541.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026