代码 701456: Warning minimum lubrication
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Warning minimum lubrication 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Minimal lubrication (MMS) was activated ( M501 to 516 ), but the MMS system signals an error (warning message). The corresponding cause of error is displayed on the "MMS system housing". 4 - Medium MIN (fill up) 6 - NC error (reserve) This message is just for informational purposes and has no effect on the machine function. 1. Eliminate the cause of error on the "MMS system". 2. Check PLC input signals MINIMUM LUBRICATION OUT DATA BCD 1,2,4,8 from MMS system. 3. As soon as the "MMS system" signals "OK" again, the message is automatically cleared. For further information with regard to this, please refer to the "LUBRIX" manufacturer's operating instructions.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701456 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701456.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026