代碼 701506: Oil/air lubrication > oil operating pressure not present
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Oil/air lubrication > oil operating pressure not present 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
"Oil/air lubrication, unit on" was actuated, but there was no response from the "Oil/air lubrication, oil operating pressure available" pressure switch within 5 seconds. Feed Stop and Spindle Stop "Oil/air lubrication, unit on" is switched off again. "Oil/air lubrication, air operating pressure valve on" is switched off. "Oil/air lubrication, vacuum suction nozzle valve on" is switched off with a run-on time of 10 minutes. Error messages Oil/air lubrication Oil/air lubrication > oil operating pressure not present 1. Check the following components: The actuation of the "Oil/air lubrication, unit on" unit. The PLC input signal and the "Oil/air lubrication, oil operating pressure available" sensor. 2. As soon as the malfunction has been remedied, press one of the following keys: [FEED START] [CYCLE START] [DELETE ERROR] Message is cleared. The menu can be found under: Chapter 2.6 ‘Oil/air lubrication’ on page 12
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701506 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701506.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026