代码 701532: Warm-up cycle spindle necessary! Start cycle with <Jog> and <Spindle Start> key
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Warm-up cycle spindle necessary! Start cycle with <Jog> and <Spindle Start> key 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
The main spindle requires a warm-up after being at a standstill for a longer time period. The warm-up time depends on how long the spindle has been at a standstill! Feed Stop and Spindle Stop as soon as M3 or M4 is programmed. A tool change is still possible. As long as the warm-up hasn't been done, an increased spindle speed (>800 rpm) is not possible. 1. Switch to manual mode. 2. Start spindle warm-up with the [SPINDLE START] key. NOTICE! Make sure the tool is suitable for the maximum speed. During the cycle, the spindle is operated for 5 minutes at 7500 rpm, and then for 5 minutes at 15000 rpm and finally for 5 minutes at 22500 rpm. If the programmed speed is changed, an alarm is given. The dwell times are also monitored, but no message is output.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701532 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701532.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026