代码 701535: Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start>
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start> 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
The cycle for the spindle warm-up was started. This is a safety query ( M152 ), to ask whether the current tool in the spindle is suitable for the maximum spindle speed of the warm-up cycle. Feed Stop and Spindle Stop Spindle warm-up menu appears on the screen. 1. Check whether the tool in the spindle is suitable for the specified spindle speed. 2. If the tool is not suitable, abort the operation in the menu with Abort and change in a suitable tool. 3. If the tool is suitable, confirm this in the menu with OK. NOTICE! Tool is turned at a high speed. Only enable such tools for the warm-up which are suitable for the maximum speed. 4. Press the [CYCLE START] and [FEED START] keys at the same time to start the warm-up cycle. Error messages Tool spindle Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle St...
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701535 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701535.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026