代碼 701532: Warm-up cycle spindle necessary! Start cycle with <Jog> and <Spindle Start> key
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Warm-up cycle spindle necessary! Start cycle with <Jog> and <Spindle Start> key 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
The main spindle requires a warm-up after being at a standstill for a longer time period. The warm-up time depends on how long the spindle has been at a standstill! Feed Stop and Spindle Stop as soon as M3 or M4 is programmed. A tool change is still possible. As long as the warm-up hasn't been done, an increased spindle speed (>800 rpm) is not possible. 1. Switch to manual mode. 2. Start spindle warm-up with the [SPINDLE START] key. NOTICE! Make sure the tool is suitable for the maximum speed. During the cycle, the spindle is operated for 5 minutes at 7500 rpm, and then for 5 minutes at 15000 rpm and finally for 5 minutes at 22500 rpm. If the programmed speed is changed, an alarm is given. The dwell times are also monitored, but no message is output.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701532 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701532.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026