代碼 701535: Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start>
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start> 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
The cycle for the spindle warm-up was started. This is a safety query ( M152 ), to ask whether the current tool in the spindle is suitable for the maximum spindle speed of the warm-up cycle. Feed Stop and Spindle Stop Spindle warm-up menu appears on the screen. 1. Check whether the tool in the spindle is suitable for the specified spindle speed. 2. If the tool is not suitable, abort the operation in the menu with Abort and change in a suitable tool. 3. If the tool is suitable, confirm this in the menu with OK. NOTICE! Tool is turned at a high speed. Only enable such tools for the warm-up which are suitable for the maximum speed. 4. Press the [CYCLE START] and [FEED START] keys at the same time to start the warm-up cycle. Error messages Tool spindle Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle St...
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701535 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701535.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026