コード 701535: Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start>
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start> アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
The cycle for the spindle warm-up was started. This is a safety query ( M152 ), to ask whether the current tool in the spindle is suitable for the maximum spindle speed of the warm-up cycle. Feed Stop and Spindle Stop Spindle warm-up menu appears on the screen. 1. Check whether the tool in the spindle is suitable for the specified spindle speed. 2. If the tool is not suitable, abort the operation in the menu with Abort and change in a suitable tool. 3. If the tool is suitable, confirm this in the menu with OK. NOTICE! Tool is turned at a high speed. Only enable such tools for the warm-up which are suitable for the maximum speed. 4. Press the [CYCLE START] and [FEED START] keys at the same time to start the warm-up cycle. Error messages Tool spindle Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle St...
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 701535 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701535.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026