代码 701538: Pre-warning, oil/air lubrication! Negative pressure, vacuum suction nozzle, not present (spindle 1/2)
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Pre-warning, oil/air lubrication! Negative pressure, vacuum suction nozzle, not present (spindle 1/2) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
"Oil/air lubrication, vacuum suction nozzle valve on" was actuated, but there was no response from the "Oil/air lubrication, vacuum suction nozzle negative pressure available" sensor within 5 seconds. The early warning has no effects at first. Machining can continue for up to another 100 hours. The malfunction must be remedied within 100 hours. Otherwise, a malfunction message appears: Check the following components: 1. The filter of the oil/air lubrication (contamination). 2. The actuation of the "Oil/air lubrication, vacuum suction nozzle valve on" valve. 3. The PLC input signal and the "Oil/air lubrication, vacuum suction nozzle negative pressure available" sensor (sensor setting). 4. The functionality of the Venturi nozzle. The menu can be found under: Chapter 2.6 ‘Oil/air lubrication’ on page 12
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701538 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701538.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026