代码 701549: Loader not ready for operation
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Loader not ready for operation 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
The function "with loader“ has been switched on, the machine is fully operational for loader operation but the loader does not signal that it is fully operational. The PLC input signal "loader ready for operation" is not present. The error message appears but has no effect on the machine. Lamp "With loader" flashes. 1. Check malfunction on loader. 2. Check output signal "from loader to machine" and the PLC input signal "Loader ready for operation". 3. Once the loader again signals fully operational the message is cancelled automatically. Information about loader malfunctions can be found in the operating instructions of the loader. Error messages Automation Loader not ready for operation
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701549 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701549.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026