コード 701631: No enable tool change! Blocked area X-axis
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な No enable tool change! Blocked area X-axis アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
A tool change was programmed, but the X-axis is in an area which was blocked. There is a danger of collision with another axis, device, etc. Tool change is not executed. As long as the X-axis is in a blocked area, tool change or travel with the magazine axis is not possible. 1. The program should be interrupted. 2. Tool change must be programmed outside the blocked area. 3. First the X-axis must be moved out of the blocked area. 4. Check the settings of the blocked areas (software cams 21 and 22).
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 701631 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701631.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026