代码 701949: Tool gate is occupied
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Tool gate is occupied 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
It was attempted to unload a tool from the magazine to the tool gate, but the place in the tool gate is occupied. PLC input signal "Tool is in the tool gate" is registered. Tool unloading is not started. 1. Cancel the operation with "Reset". Press the [Stop/Start (Reset)] key for longer than 3 seconds. 2. Empty the tool gate: Remove the tool from the tool gate. Remove data from tool management WART2. 3. Restart the unloading operation. 4. Check PLC input signal "Tool in the tool gate". The diagnostic overview of the sensor signals can be found under: Chapter 2.2 ‘Tool changer diagnostics menu’ on page 11
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701949 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701949.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026