Code 5220: REFERENCE POINT ADJUSTMENT MODE
Issue Description & Safety Warning
The Fanuc 16i/18i/21i CNC has triggered a critical REFERENCE POINT ADJUSTMENT MODE alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
A parameter for automatically set a reference position is set. (Bit 2 of parameter No. 1819 = 1) Perform automatic setting. (Position the machine at the reference position manually, then perform manual reference position return.) Supplementary: Automatic setting sets bit 2 of parameter N o. 1819 to 0.
Source: Fanuc Series 16i/18i/21i-B Operator's Manual, Appendix G Alarm List (B-63864EN/03)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Fanuc 16i/18i/21i CNC Alarms
Fanuc controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code 5220 on the 16i/18i/21i CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Fanuc's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 360 Fanuc 16i/18i/21i CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code 5220.
Need a searchable reference for more Fanuc 16i/18i/21i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026