Code ER37: TOO MUCH SLOT IN
Issue Description & Safety Warning
The Fanuc 30i/31i/32i CNC has triggered a critical TOO MUCH SLOT IN alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
BASE(CHn) (Note3) Correct the slot number to a value of 10 or less. The slot number for the I/O Link exceed the upper limit (10). The slot number larger than 11 is regarded as invalid.
Source: Fanuc Series 30i/31i/32i-A Maintenance Manual, Appendix A Alarm List — PMC alarms (B-64485EN/01)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Fanuc 30i/31i/32i CNC Alarms
Fanuc controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code ER37 on the 30i/31i/32i CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Fanuc's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 85 Fanuc 30i/31i/32i CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code ER37.
Need a searchable reference for more Fanuc 30i/31i/32i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026