FaultResolve
返回搜索目录
Search this section

Search Fanuc R-30i Series Robot Controller

Search other Fanuc R-30i Series Robot Controller alarms without going back to the model list.

Search all database

代码 CVIS-456: This camera is not supported.

问题描述与安全警告

Fanuc R-30i Series Robot Controller 触发了严重的 This camera is not supported. 警报。需要由合格的操作员或维修技师立即处理,以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前,请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。

官方故障排除步骤

Cause: This camera is not supported. Remedy: Change camera. CVIS-457: A 2-D Barcode could not be found in the image. Cause: A 2-D Barcode could not be found in the image. Remedy: View the binary image on the setup page to verify that the threshold is correct. Check the search window on the setup page to verify that the 2-D Barcode is within the window. CVIS-458: The 2-D Barcode geometry is bad. Cause: The 2-D Barcode geometry is bad. Remedy: View the binary image on the setup page to verify that the threshold is correct. Check the search window on the setup page to verify that the 2-D Barcode is within the window. For Data Matrix code, verify that the 2-D Barcode has an even number of rows and columns. Verify that the 2-D Barcode is not damaged. CVIS-459: The 2-D Barcode is too damaged to read. Cause: The 2-D Barcode is too damaged to read. Remedy: For Data Matrix code, view the binary image on the setup page to verify that the threshold is correct. Check the search window on the setup page to verify that the 2-D Barcode is within the window. Verify that the 2-D Barcode is not damaged. CVIS-460: 2-D Barcode reader internal software error. Cause: Internal error. Remedy: Contact your local FANUC representative. CVIS-461: Illegal character found in 2-D Barcode. Cause: An illegal text character was found in the 2-D Barcode. Remedy: Verify that the 2-D Barcode is not damaged. CVIS-462: The 2-D Barcode reader does not support Base 256 encoding. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-463: The 2-D Barcode reader does not support FNC1 alternate data types. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-464: The 2-D Barcode reader does not support Structured Append sequences. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-465: The 2-D Barcode reader does not support Reader Programming. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-466: The 2-D Barcode reader does not support Upper Shift to Extended ASCII characters. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-467: The 2-D Barcode reader does not support 05 Macros. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-468: The 2-D Barcode reader does not support 06 Macros. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-469: The 2-D Barcode reader does not support ANSI X12 encoding. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. CVIS-470: The 2-D Barcode reader does not support EDIFACT encoding. Cause: The 2-D Barcode contains an unsupported feature. Remedy: None. 4.ERROR CODES B-83124EN-6/02 CVIS-471: The 2-D Barcode reader does not support Extended Channel Interpretation (ECI). Cause: The 2-D Barcode contains an unsupported feature. Remedy: None.

Source: FANUC Robot R-30iA Alarm Code List Operator's Manual

Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.

关于 Fanuc R-30i Series Robot Controller 警报

由 Fanuc 制造的工业控制器具有广泛的诊断系统,用于保护内部电路和机械连杆。当 R-30i Series Robot Controller 出现类似 CVIS-456 的错误代码时,通常表示指令值与实际传感器反馈之间存在不匹配。

完整报警清单: 6553 Fanuc R-30i Series Robot Controller 代码s.

Have a better solution?

Help the industrial community by sharing your repair experience for code CVIS-456.

Manual conversion service

Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?

We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.

Convert PDF fault-code charts and manuals into clean data.
Build public SEO pages or private internal search tools.
Prioritize updates around codes and manuals people search for.
Request manual conversion Email PDFs to manuals.errordb@gmail.com
Advertisement

Space reserved for Google AdSense / Industrial Affiliate Links

Monetization target for 2026

相关的 Fanuc R-30i Series Robot Controller 代码