Code DNET-003: Too many DNet motherboards
Issue Description & Safety Warning
The Fanuc R-30i Series Robot Controller has triggered a critical Too many DNet motherboards alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
Cause: There are too many DeviceNet motherboards connected to the robot controller. Remedy: Turn off controller power. Disconnect one of the DeviceNet motherboards. Re-connect any DeviceNet cables to the other DeviceNet motherboard. Power on your controller.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Fanuc R-30i Series Robot Controller Alarms
Fanuc controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code DNET-003 on the R-30i Series Robot Controller identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Fanuc's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 6553 Fanuc R-30i Series Robot Controller codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code DNET-003.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026