代码 FRSY-023: No blocks were purged
问题描述与安全警告
Fanuc R-30i Series Robot Controller 触发了严重的 No blocks were purged 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Cause: No blocks were purged for one of the following reasons: 1. No garbage blocks exist. 2. No spare blocks exist because the FROM disk is full. Remedy: If you require more blocks, you must back up all your files, reformat the device, and restore the files. Refer to the File System chapter in the KAREL Reference Manual for more information.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Fanuc R-30i Series Robot Controller 警报
由 Fanuc 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 R-30i Series Robot Controller 出现类似 FRSY-023 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code FRSY-023.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026