代码 PALL-010: %s is not reachable
问题描述与安全警告
Fanuc R-30i Series Robot Controller 触发了严重的 %s is not reachable 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Cause: The position the robot is trying to go to is not reachable. If the proceeding error is: 'Error: Pallet=x Unit=y', it means that the robot was working with pallet x and box y when the error occurred. Remedy: Verify that the value of $UTOOL and/or $MNUTOOL are correct. If the robot stopped while heading towards the pallet, then check the value of Pallet approach length and width in Optimal path setup. You might have specified large pallet offsets or you might need to specify a correct pallet offset in the Optimal path setup.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Fanuc R-30i Series Robot Controller 警报
由 Fanuc 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 R-30i Series Robot Controller 出现类似 PALL-010 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code PALL-010.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026