代码 SRVO-278: TP E-stop(SVEMG abnormal)
问题描述与安全警告
Fanuc R-30i Series Robot Controller 触发了严重的 TP E-stop(SVEMG abnormal) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Cause: The EMERGENCY STOP button on the Teach Pendant was pressed, but the EMERGENCY STOP line was not disconnected. Remedy: 1. Release the TP EMERGENCY STOP button, then the controller power cycle again. 2. When the TP EMERGENCY STOP button is pushed again, and this alarm occurs again, refer to the Controller Maintenance Manual for more information(SRVO-202). Note: 1. Cycle power to release this alarm. 2. This alarm might occur when the emergency stop button is pushed slowly. In this case, the above remedy 2 is unnecessary.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Fanuc R-30i Series Robot Controller 警报
由 Fanuc 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 R-30i Series Robot Controller 出现类似 SRVO-278 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code SRVO-278.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026