Code 140-0057: Illegal value
Issue Description & Safety Warning
The Heidenhain TNC Series CNC has triggered a critical Illegal value alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
[Cause of error] - The test of the entered value found that it is incorrect or invalid. - Whether the value is valid can also depend on other machine parameters (plausibility). [Error correction] - Check the entered value and change it if necessary. If the parameter depends on other parameters, you must consider them as well. - Inform your service agency
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Heidenhain TNC Series CNC Alarms
Heidenhain controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code 140-0057 on the TNC Series CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Heidenhain's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 4497 Heidenhain TNC Series CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code 140-0057.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026