Code 280-07DB: Data not loaded
Issue Description & Safety Warning
The Heidenhain TNC Series CNC has triggered a critical Data not loaded alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
[Cause of error] Data were not accepted because the tool number was changed. In the set-up function, the number (reference) of the current tool was changed. Because of this, all edited data were discarded and the data of the tool with the new number were loaded. [Error correction] None
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Heidenhain TNC Series CNC Alarms
Heidenhain controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code 280-07DB on the TNC Series CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Heidenhain's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 4497 Heidenhain TNC Series CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code 280-07DB.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026