代码 M01-1115: P torque stopper disabled
问题描述与安全警告
Mitsubishi M800/M80 CNC 触发了严重的 P torque stopper disabled 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Details Proportional torque stopper control is commanded to the axis which the parameter "#2296 SV096(TQC)" (Constant torque control: Stopper- direction torque) setting is "0". Proportional torque stopper control is commanded to t he axis which is in movem ent by automatic or man- ual operation. The axis movement is commanded to the axis which is in the proportional torque constant control. Proportional torque constant control is commanded a gain during the axis movem ent by proportional torque constant control cancel. Proportional torque constant control axis is at stroke limit or H/W stroke end. Remedy Check the program. Check the sequence program.
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Mitsubishi M800/M80 CNC 警报
由 Mitsubishi 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 M800/M80 CNC 出现类似 M01-1115 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 722 Mitsubishi M800/M80 CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code M01-1115.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026