代码 F00041: Motor Data Identification Failure

Reaction: OFF 2 Acknowledge: Quit fault eg. via DI2 Cause: Motor data identification failed. - r0949 = 0: Load missing - r0949 = 1: Current limit level reached during identification. - r0949 = 2: Identified stator resistance less than 0.1% or greater than 100%. - r0949 = 3: Identified rotor resistance less than 0.1% or greater than 100%. - r0949 = 4: Identified stator reactance less than 50% and greater than 500% - r0949 = 5: Identified main reactance less than 50% and greater than 500% - r0949 = 6: Identified rotor time constant less than 10ms or greater than 5s - r0949 = 7: Identified total leakage reactance less than 5% and greater than 50% - r0949 = 20: Identified IGBT on-voltage less than 0.5 V or greater than 10 V - r0949 = 30: Current controller at voltage limit - r0949 = 40: Inconsistence of identified dataset, at least one identification failed - r0949 = 41: Writing of calculated magnetizing current P0320 failed - r0949 = 42: Writing of identified stator resistance failed - r0949 = 43: Writing of identified rotor resistance P0354 failed - r0949 = 44: Writing of identified rotor time constant P0622 failed - r0949 = 45: Writing of identified mutual reactance P0360 failed - r0949 = 46: Writing of identified stator leakage reactance P0356 failed - r0949 = 47: Writing of identified rotor leakage reactance P0358 failed - r0949 = 48: Writing of identified on voltage P1825 failed. - r0949 = 49: Writing of the identified dead time compensation P1828 failed Percentage values based on the impedance Zb = Vmot,nom / sqrt(3) / Imot,nom Remedy: Check the following: - r0949 = 0: is the motor connected to the inverter. - r0949 = 1-49: are the motor data in p0304 - p0311 correct. - Check what type of motor wiring is required (star, delta).