代码 F00061: Par Cl. MMC-PS not fitted Fault
问题描述与安全警告
Siemens SINAMICS G120 CU240S Drive 触发了严重的 Par Cl. MMC-PS not fitted Fault 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Reaction: OFF 2 Acknowledge: Quit fault eg. via DI2 Cause: MMC-PS Cloning Failed. - r0949 = 0: MMC-PS Not Connected or incorrect MMC-PS Type - r0949 = 1: MMC-PS cannot write to MMC - r0949 = 2: MMC-PS File not available - r0949 = 3: MMC-PS cannot read the file - r0949 = 4: MMC-PS problems in the clone File (e.g CRC) Remedy: - r0949 = 0: Use MMC-PS with FAT12 or FAT16 format or correct MMC-PS Type, or fit an MMC-PS to Drive. - r0949 = 1: Check MMC (e.g is MMC full) - Format MMC again to FAT16 - r0949 = 2: Put the correct named file in the correct directory /USER/SINAMICS/DATA. - r0949 = 3: Make sure File is accesable. Recreate File if possible - r0949 = 4: File has been changed - Recreate File
Source: SINAMICS G120 Control Units CU240S Faults and Alarms (Edition 05/2007)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Siemens SINAMICS G120 CU240S Drive 警报
由 Siemens 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 SINAMICS G120 CU240S Drive 出现类似 F00061 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code F00061.
Need a searchable reference for more Siemens SINAMICS G120 CU240S Drive manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026