代码 10730: [Channel %1: ] Block %3 axis %2 working area limitation %4

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Block number, label %4 = String (+ or -) Definitions: This alarm is generated if it is determined duri ng block preparation that the programmed path of the axis violates the wo rking area limitation. If bit 11=0 in machine data MD11411$MN_ENABLE_AL ARM_MASK, this alarm is issued instead of alarm 10732. If bit 11 is set in machine dat aMD11411 $MN_ENABLE_ALARM_MASK, an expanded diagnostics option is offered for the software limit sw itch violation. The condi tion for activation is the presence of the ALUN* alarm file in the HMI. Reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. Remedy: a) Check NC program for correct positional data and, if necessary, make corrections. b) Check zero offsets (current frame) c) Correct working area limitation via G25/G26, or d) Correct working area limitation via setting data, or e) Deactivate working area limitation vi a setting data 43410 WORKAREA_MINUS_ENABLE=FALSE Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.