Code 10810: [Channel %1: ] Block %2 master spindle not defined

Parameters: %1 = Channel number %2 = Block number, label Definitions: The function "Revolutional feedrate" (with G95 or G96), or "Rigid tapping" (with G331/G332) has been programmed, although no master spindle is defi ned from which the speed could be derived. For the definition the MD 20090 $MC_SPIND_DEF_MASTER_SPIND is available for the default or the keyword SETMS in the part program, thus allo wing each spindle of the channel to be redefined as master spindle. Reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. Remedy: Preset the master spindle with MD20090 $MC_SPIND_DEF_MASTER_SPIND[n]=m (n... channel index, m... spindel no.) or define it with an identif ier in an NC part program before a G function that requires a master spindle is programmed. The machine axis that is to be operated as a spindle must be equipped in MD35000 $MA_SPIND_ASSIGN_TO_MACHAX[n]=m (n... machine axis index, m... spindle no.) with a spindle number. Additionally, the MD20070 $MC_AXCONF_ MACHAX_USED[n]=m (n... channel axis index, m... machine axis index) must be used to assign it to a channel (channel axis index 1 or 2). Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.