Código 10941: [Channel %1: ] Block %2: Curve table %3: NC SRAM memory full, type %4

Parameters: %1 = Channel number %2 = Block number, label %3 = Number of curve table %4 = Object type Definitions: Insufficient free dynamic memory during curve table definition. The object type parameter specifies for which curve table object the memory will not suffice: 1: Number of curve tables too small (MD18400 $MN_MM_NUM_CURVE_TABS) 2: Number of linear curve table segments too small (MD18403 $MN_MM_NUM_CURVE_SEG_LIN) 3: Number of polynomial curve table segments too small (MD18402 $MN_MM_NUM_CURVE_SEGMENTS) 4: Number of curve table polynomials too small (MD18404 $MN_MM_NUM_CURVE_POLYNOMS) Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel / service department. Delete cu rve tables that are no longer required, or reconfigure the memory space for t he curve tables. The curve table definition process now has to be repeated; see machine data: MD18400 $MN_MM_NUM_CURVE_TABS, MD18402 $MN_MM_NUM_CURVE_SEGMENTS, MD18403 $MN_MM_NUM_CURVE_SEG_LIN, MD 18404 $MN_MM_NUM_CURVE_POLYNOMS. Program Continuation: Clear alarm with the RESET key. Restart part program