Volver a todos los modelos de Siemens Search all database
Siemens SINUMERIK 840D CNC
Códigos de error de Siemens SINUMERIK 840D CNC
Referencia completa de códigos de alarma y error para Siemens SINUMERIK 840D CNC. Explore a continuación los 4014 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Siemens SINUMERIK 840D CNC
Search all 4014 Siemens SINUMERIK 840D CNC codes without changing pages.
Lista completa de alarmas (Page 1 of 21)
Código 1030
System error in link module error code %1 error type %2
Ver solución Código 1031
Link module generated an un specified error %1 NCU %2 %3 %4
Ver solución Código 1100
No valid firmware
Ver solución Código 2000
PLC sign-of-life monitoring
Ver solución Código 2001
PLC has not started up
Ver solución Código 2100
NCK battery warning threshold reached
Ver solución Código 2101
NCK battery alarm
Ver solución Código 2102
NCK battery alarm
Ver solución Código 2110
NCK temperature alarm
Ver solución Código 2120
NCK fan alarm type %1
Ver solución Código 2130
5V/24V encoder or 15V D/A converter undervoltage
Ver solución Código 2140
The actual service switch position forces the SRAM to be cleared at the next Power On (general reset active)
Ver solución Código 2190
Hardware plug-in modu le for communication wi th the digitizer missing
Ver solución Código 2192
No NCU link module exists, MD %1 reset
Ver solución Código 2193
'Safety Integrated' is not available for link axis %1.
Ver solución Código 2194
Link axis active and $MN_MM_SERVO_FIFO_SIZE != 3
Ver solución Código 2195
[Channel %1: ] Axis %2 high-speed punching/nibbling not possible via link
Ver solución Código 2196
Link axis active andMD18720 $MN_MM_SERVO_FIFO_SIZE != %1
Ver solución Código 2200
[Channel %1: ] Fast punching/nibbling not possible in several channels
Ver solución Código 2900
Reboot is delayed
Ver solución Código 3000
Emergency stop
Ver solución Código 4000
[Channel %1: ] Machine data %2[%3] has gap in axis assignment
Ver solución Código 4001
[Channel %1: ] Axis %2 defined for more than one channel via machine data %3
Ver solución Código 4002
[Channel %1: ] Machine data %2[%3] assigns an axis not defined in channel
Ver solución Código 4003
Axis %1 incorrect assignment of master channel in machine data %2
Ver solución Código 4004
[Channel %1: ] Machine data %2 axis %3 defined repeatedly as geometry axis
Ver solución Código 4005
[Channel %1: ] Maximum number of axes in channel %1 exceeded. Limit %2
Ver solución Código 4006
The maximum number of activatable axes has been exceeded (limit %1)
Ver solución Código 4007
Axis %1 incorrect assignment of master NCU in machine data %2
Ver solución Código 4010
Invalid identifier used in machine data %1[%2]
Ver solución Código 4011
[Channel %1: ] Invalid identifier used in machine data %2[%3]
Ver solución Código 4012
Invalid identifier used in machine data %1[%2]
Ver solución Código 4013
Invalid NCU link config uration by machin e data %1 = %2 , on NCU_1 = %3
Ver solución Código 4014
Axis %1 defined several times in %2
Ver solución Código 4016
Axis %1 already used by NCU %2
Ver solución Código 4017
Axis container %1, location %2 already used by NCU %3
Ver solución Código 4018
Axis container %1, location %2 not used by any channel
Ver solución Código 4019
Axis container %1 advance not allowed with current status of NCU %2
Ver solución Código 4020
Identifier %1 used several times in machine data %2
Ver solución Código 4021
[Channel %1: ] Identifier %2 used several times in machine data %3
Ver solución Código 4022
[Channel %1: ] Axis %2: axis contai ner %3 switch not allowed: ext. work offset active
Ver solución Código 4023
Axis container %1 switch not allowed, axis container %2 switch active
Ver solución Código 4024
Invalid axis configuration due to missing axis container machine data
Ver solución Código 4025
[Channel %1: ] Axis %2: axis container %3 switch not allowed: master/slave active.
Ver solución Código 4026
Machine data %1[%2], link axis NC%3_AX%4 not used by any channel
Ver solución Código 4027
NOTICE! MD %1 was also changed for the other axes of axis container %2
Ver solución Código 4028
Attention! The axial MDs of the axes of the axis containers were matched.
Ver solución Código 4029
NOTICE! The axial MDs in axis container %1 will be matched on the next power-up
Ver solución Código 4030
[Channel %1: ] Identifier missing in machine date %2[%3]
Ver solución Código 4031
[Channel %1: ] Link axis %2 defined for more than one channel in machine data %3
Ver solución Código 4032
[Channel %1: ] Wrong identifier for facing axis in %2
Ver solución Código 4033
NOTICE! NCU link communication still not connected
Ver solución Código 4034
Local link axis %1 is not allowed for different interpolation cycle time = %2/%3
Ver solución Código 4035
Interpolation cycle from NCU %1 = %2 does not match NCU%3 = %4
Ver solución Código 4036
Wrong NCU link configuration by MD %1
Ver solución Código 4040
[Channel %1: ] Axis identifier %2 not consistent with machine data %3
Ver solución Código 4045
[Channel %1: ] Conflict between machine data %2 and machine data %3
Ver solución Código 4050
NC code identifier %1 cannot be reconfigured to %2
Ver solución Código 4060
Standard machine data loaded (%1, %2, %3, %4)
Ver solución Código 4062
Backup data loaded
Ver solución Código 4065
Buffered memory was restored from backup medium (potential loss of data!)
Ver solución Código 4070
Normalizing machine data has been changed
Ver solución Código 4071
Check the position of the encoder
Ver solución Código 4073
Compile cycle functions define machine data number %1 several times
Ver solución Código 4075
Machine data %1 (and maybe others) not changed due to missing permission level %2
Ver solución Código 4076
%1 Machine data could not be changed with permission level %2
Ver solución Código 4077
New value %1 of MD %2 not set. Requested %3 bytes too much %4 memory.
Ver solución Código 4080
Incorrect configuration of indexing axis in MD %1
Ver solución Código 4090
Too many errors during power-up
Ver solución Código 4099
%1 error(s) during processing of MD initialization
Ver solución Código 4100
System cycle time/scan time divider corrected for digital drive
Ver solución Código 4110
IPO cycle changed to %1 ms
Ver solución Código 4111
PLC cycle increased to %1 ms
Ver solución Código 4112
Servo cycle changed to %1 ms
Ver solución Código 4113
Sysclock cycle changed to %1 ms
Ver solución Código 4114
Error in DP cycle of the SDB
Ver solución Código 4115
Time ratio communication to Ipo changed to %1
Ver solución Código 4150
[Channel %1: ] Invalid M function subprogram call configured
Ver solución Código 4152
Illegal configuration of the 'Block display with absolute values' function
Ver solución Código 4160
[Channel %1: ] Invalid M function number configured for spindle switchover
Ver solución Código 4170
Invalid M function number for channel synchronisation assigned
Ver solución Código 4180
Invalid M function number assigned to enable ASUP
Ver solución Código 4181
[Channel %1: ] Invalid assignment of an M auxiliary function number
Ver solución Código 4182
[Channel %1: ] Invalid M auxiliary function number in %2%3, MD reset
Ver solución Código 4183
[Channel %1: ] M auxiliary function number %2 used several times (%3 and %4)
Ver solución Código 4184
[Channel %1: ] Illegally predefined auxiliary function in %2%3, MD reset
Ver solución Código 4185
[Channel %1: ] Illegal auxiliary function configured %2 %3 %4
Ver solución Código 4200
[Channel %1: ] Geometry axis %2 must not be declared a rotary axis
Ver solución Código 4210
[Channel %1: ] Spindle %2 declaration as rotary axis missing
Ver solución Código 4215
[Channel %1: ] Spindle %2 declaration as modulo axis missing
Ver solución Código 4220
[Channel %1: ] Spindle %2 declared repeatedly
Ver solución Código 4225
[Channel %1: ] Axis %2 declaration as rotary axis missing
Ver solución Código 4230
[Channel %1: ] Data alteration from external not possible in current channel state
Ver solución Código 4240
Runtime overflow for IPO cycle or position controller cycle, IP %1
Ver solución Código 4250
FastPlcCom functionality not available
Ver solución Código 4252
PLCIO read error: %1
Ver solución Código 4254
PLCIO write error: %1
Ver solución Código 4260
Machine data %1 illegal
Ver solución Código 4270
Machine data %1 assigns not activated NCK input/output byte %2
Ver solución Código 4275
Machine data %1 and %2 both assign the same NCK output byte no. %3 several times
Ver solución Código 4280
Assignment of NCK input/output byte via MD %1[%2] does not match hardware configuration
Ver solución Código 4282
Hardware of external NCK outputs assigned repeatedly
Ver solución Código 4285
Error on terminal block %1, error code %2
Ver solución Código 4290
Sign of life monitoring: local P-bus not alive
Ver solución Código 4291
Failure of module in local P-bus slot %1, error codes %2 %3 %4
Ver solución Código 4300
Declaration in MD %1 is not allowed for axis %2.
Ver solución Código 4310
Declaration in MD %1 index %2 is not allowed.
Ver solución Código 4320
Axis %1 function %2 %3 and %4 not allowed
Ver solución Código 4334
[Channel %1: ] The amount of fine correction in parameter %2 of the orientable toolholder %3 is too large
Ver solución Código 4336
[Channel %1: ] Orientable toolholder no. %2 for orientation transformation %3 does not exist
Ver solución Código 4338
[Channel %1: ] Invalid transformation type '%2' in toolholder %3 for orientation transformer %4
Ver solución Código 4340
[Channel %1: ] Block %2 invalid transformation type in transformation no. %3
Ver solución Código 4341
[Channel %1: ] Block %2 no data set available for transformation no. %3
Ver solución Código 4342
[Channel %1: ] Invalid machine data for general 5-axis transformation error no. %2
Ver solución Código 4343
[Channel %1: ] Attempt made to change the machine data of an active transformation.
Ver solución Código 4344
[Channel %1: ] Block %2 Axis %3 defined in $NK_NAME[%4] is not available in the current channel
Ver solución Código 4345
[Channel %1: ] Invalid configuration in chained transformation no. %2
Ver solución Código 4346
[Channel %1: ] Invalid geoaxis assignment in machine data %2[%3]
Ver solución Código 4347
[Channel %1: ] Invalid channel axis assignment in machine data %2[%3]
Ver solución Código 4348
[Channel %1: ] Block %5 Configuration error %6 in transformation $NT_NAME[%3] = '%2'.
Ver solución Código 4349
[Channel %1: ] No free memory space available for transformations.
Ver solución Código 4350
[Channel %1: ] Axis identifier %2 machine data %3 not consistent with machine data %4
Ver solución Código 4400
MD alteration will cause reorganiza tion of buffered memory (Art %1), (loss of data!) - %2
Ver solución Código 4402
%1 causes a machine data reset
Ver solución Código 4502
[Channel %1: ] Anachronism %2(%3) -> %4
Ver solución Código 4503
[TO unit %1: ] H number %2 assigned more than once. H number linked again.
Ver solución Código 4600
Invalid handwheel type for handwheel %1
Ver solución Código 4610
Invalid handwheel module for handwheel %1
Ver solución Código 4611
Invalid handwheel input for handwheel %1
Ver solución Código 4620
Invalid handwheel module for handwheel %1
Ver solución Código 4621
Invalid handwheel input for handwheel %1
Ver solución Código 4630
Invalid handwheel module for handwheel %1
Ver solución Código 4631
Invalid handwheel slot for handwheel %1
Ver solución Código 4632
Logical PROFIBUS handwheel slot base address for handwheel %1 not found
Ver solución Código 4640
Invalid handwheel module for handwheel %1
Ver solución Código 4641
Invalid handwheel input for handwheel %1
Ver solución Código 4700
PROFIBUS I/O: The logical slot / I/O area address %1 was not found.
Ver solución Código 4702
PROFIBUS I/O: The logical slot / I/O area address %1 was not found.
Ver solución Código 5000
Communication job not executable %1
Ver solución Código 6000
Memory reorganized using standard machine data
Ver solución Código 6010
[Channel %1: ] Data block %2 not or not completely created, error code %3
Ver solución Código 6020
Machine data have been changed - now memory is reorganized
Ver solución Código 6030
Limit of user memory has been adapted
Ver solución Código 6035
Instead of %1 KB the system has only %2 KB of free user memory of type '%3'
Ver solución Código 6100
Error while creating %1, error number %2 %3
Ver solución Código 6200
Memory for CC MD full.
Ver solución Código 6401
[Channel %1: ] Tool change not possible: Empty location for tool %2 on magazine %4 not available.
Ver solución Código 6402
[Channel %1: ] Tool change not possi ble. Magazine no. %2 not available
Ver solución Código 6403
[Channel %1: ] Tool change not possi ble. Magazine location number %2 on magazine %3 not available.
Ver solución Código 6404
[Channel %1: ] Tool change not possi ble. Tool %2 not available or not usable
Ver solución Código 6405
[Channel %1: ] Command %2 has invalid PLC acknowledge parameter %3 - identifier %4
Ver solución Código 6406
[Channel %1: ] PLC acknowledg e for command %2 is missing
Ver solución Código 6407
[Channel %1: ] Tool %2 cannot be placed in magazine %3 on location %4. Invalid definition of magazine!
Ver solución Código 6410
[TO unit %1: ] Tool %2 has reached its prewarning limit with D = %4
Ver solución Código 6411
[Channel %1: ] Tool %2 has reached its prewarning limit with D = %4
Ver solución Código 6412
[TO unit %1: ] Tool %2 has reached its monitoring limit with D = %4
Ver solución Código 6413
[Channel %1: ] Tool %2 has reached its monitoring limit with D = %4
Ver solución Código 6415
[TO unit %1: ] Tool %2 with tool edge no. %3 has reached tool monitor warning limit
Ver solución Código 6416
[Channel %1: ] Tool %2 with tool edge no. %3 has reached tool monitor warning limit
Ver solución Código 6417
[TO unit %1: ] Tool %2 with tool edge no. %3 has reached tool monitoring limit
Ver solución Código 6418
[Channel %1: ] Tool %2 with tool edge no. %3 has reached tool monitoring limit
Ver solución Código 6421
[Channel %1: ] Tool move not possibl e. Empty location for tool %2 on magazine %4 not available.
Ver solución Código 6422
[Channel %1: ] Tool move not possibl e. Magazine no. %2 not available.
Ver solución Código 6423
[Channel %1: ] Tool move not possible. Location %2 on magazine %3 not available.
Ver solución Código 6424
[Channel %1: ] Tool move not possible. Tool %2 not available/not usable.
Ver solución Código 6425
[Channel %1: ] Tool %2 cannot be placed in magazine %3 on location %4. Invalid definition of magazine!
Ver solución Código 6430
Workpiece counter: overflow in table of monitored cutting edges.
Ver solución Código 6431
[Channel %1: ] Block %2 Function not allowed. Tool management/monitoring is not active.
Ver solución Código 6432
Function not executable. No tool assigned to tool holder/spindle
Ver solución Código 6433
[Channel %1: ] Block %2 %3 not available with tool management
Ver solución Código 6434
[Channel %1: ] Block %2 NC command SETMTH not allowed because tool holder function not active
Ver solución Código 6441
Writing of $P_USEKT not allowed.
Ver solución Código 6442
[Channel %1: ] Function not executable. No tool assigned to desired magazine/magazine location %2.
Ver solución Código 6450
[Channel %1: ] Block %2 tool change not possible. Invalid magazine location no. %3 in buffer magazine
Ver solución Código 6451
[Channel %1: ] Block %2 tool cha nge not possible. No buffer magazine defined.
Ver solución Código 6452
[Channel %1: ] Block %2 tool change not possible. Tool holder/spindle number = %3 not defined.
Ver solución Código 6453
[Channel %1: ] Block %2 tool change not possible. No assignment between toolholder/spi ndle no. = %3 and buffer magazine location %4
Ver solución Código 6454
[Channel %1: ] Block %2 tool change not possible. No distance relation available.
Ver solución Código 6455
[Channel %1: ] Block %2 tool change not possible. Magazine location no. %3 not available in magazine %4
Ver solución Código 6500
NC memory full
Ver solución Código 6510
Too many part prog rams in the NC memory
Ver solución Código 6520
The value of the machin e data %1%2 is too low
Ver solución Código 6530
Too many files in directory
Ver solución Código 6540
Too many director ies in the NC memory
Ver solución Código 6550
Too many subdirectories
Ver solución Código 6560
Data format not allowed
Ver solución Código 6570
NC memory full
Ver solución Código 6580
NC memory full
Ver solución Código 6581
NC user memory full
Ver solución Código 6582
NC machine OEM memory full
Ver solución Código 6583
NC system memory full
Ver solución Código 6584
NC memory limit TMP reached
Ver solución Código 6585
NC external memory limit reached
Ver solución Código 6693
File %1 lost
Ver solución Código 6700
[Channel %1: ] Value of the machine data %2%3 is too low
Ver solución Código 7000
Too many compile cycle alarms defined
Ver solución Código 7010
MMC number range exceeded
Ver solución Código 7020
Compile cycle alarm number has not been defined
Ver solución Código 7100
Compile cycles VDI area: %1 byte for inputs and %2 byte for outputs. Maximum %3 bytes available.
Ver solución Código 7200
Problem with externally linked compile cycle %1 %2
Ver solución 1-200 of 4014
Next →