代码 120120: %1 see explanation

Parameters: %1 = Alarm texts are displayed below in re spect of individual c auses of the alarm Definitions: Alarm text: Alarm list is full. Pending alarms/messages c ould not be entered into the alarm list due to lack of space. The alarm cannot be deleted, as this event has made the alarm list permanently inconsistent. Alarm text: Number of alarm texts too high. The number of alarm texts is currently limited to 5000. This limit has been exceeded by the alarm text configuration. Alarm text: File %1 not found. Alarm text: Input/output error in file %1. Alarm text: Input/output error. Alarm text: Error on reading from the index file. Alarm text: Error on writing into the index file. Alarm text: Syntax error in alarm text file %1. Alarm texts are stored in files. One of these files could not be accessed properly. HMI-Alarms Diagnostics Manual (DAsl), 03/2009 Reaction: Alarm display. Remedy: Expand the alarm list (Enter maximum number in the file mbdde.ini in the section [Alarms]). Then perform a cold restart for the operator panel. Reduce the number of alarm texts. Then perform a cold restart for the operator panel. Make sure that the MMC memory on the hard disk is available after booting, or re-install the MMC software. When entering your own alarm texts, check whether the path and file name are entered correctly in mbdde.ini. Program Continuation: Internal