代码 12030: [Channel %1: ] Block %2 invalid parameter or data type in %3

Parameters: %1 = Channel number %2 = Block number, label %3 = Source string Definitions: In polynomial interpolation, polynomials must not be greater than the 3rd degree (refer to Programming Guide). f(p) = a0 + a1 p + a2 p2 + a3 p3 The coefficients a0 (the starting points) are identic al to the end points of the preceding block and need not be programmed. In the polynomial block, a maximum of 3 coefficients per ax is is therefore allowed (a1, a2, a3). Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the function "C orrection block" with the softkey PROGRAM CORRECT. The correction pointer positions on the incorrect block. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.