代码 12350: [Channel %1: ] Block %2 parameter %3 no longer possible

Parameters: %1 = Channel number %2 = Block number, label %3 = Source string Definitions: An attempt has been made to transfer actual parameters although axis parameters located before them have not been assigned. For procedure or function calls, assignment of parameters that are no longer required can be omitted, if subsequently no fu rther parameters are to be transferred. Example: N10 FGROUP(X, Y, Z, A, B); max. 8 axes possib le The following call-by-value parameters would then be initialized with zero because the space-dependen t assignment has been lost on account of the omitted axis parameters. Axes t hat can be omitted and following parameters do not occur in the predefined procedures and functions. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the function "C orrection block" with the softkey PROGRAM CORRECT. The correction pointer positions on the inco rrect block. In predefi ned procedures and functions either remove the following parameters or transfe r any preceding axis param eters. In user-defined procedures and functions, parameter transfer must be programmed in accordance with the instructions given in the machine manufacturer's programming guide. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.