Código 12470: [Channel %1: ] Block %2 G function %3 is unknown

Parameters: %1 = Channel number %2 = Block number, label %3 = Source string Definitions: With indirectly programmed G functions, an invalid or non-allowed group number has been programmed. Allowed group number = 1. and 5 max. number of G groups. In the displayed block, a nondefined G function has been programmed. Only "real" G functions are checked, which begin with the address G, e.g. G555. "Named" G functions such as CSPLINE, BRISK etc. are interpreted as subroutine names. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the function "C orrection block" with the softkey PROGRAM CORRECT. The correction pointer positions on the inco rrect block. You should decide on the basis of the machine manufacturer's programming guide whether or not the displayed G function exists or is available, or whether a standard G function has been reconfigured (or introduced by an OEM). Remove G function from the part program or program functi on call in accordance with the machine manufacturer's programming guide. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.